joelfromaus@aussie.zone to memesEnglish · 8 hours agoWhere my iT’s A fEaTuRe homeys at?aussie.zoneimagemessage-square70linkfedilinkarrow-up1640arrow-down15file-text
arrow-up1635arrow-down1imageWhere my iT’s A fEaTuRe homeys at?aussie.zonejoelfromaus@aussie.zone to memesEnglish · 8 hours agomessage-square70linkfedilinkfile-text
minus-squareLexamlinkfedilinkEnglisharrow-up17·7 hours agoGet a Step Bit. Then drill into the screw head until it pops off. I deal with contractors that over torque bolts on a regular basis.
minus-squarebetterdeadthanredditlinkfedilinkarrow-up44·7 hours agoHelp me step-bit, I’m stuck and stripped!
minus-squaredavidgrolinkfedilinkarrow-up6·7 hours agoDo they make those in a reverse direction so once it gets a bite it can just unscrew?
minus-squarenotabot@piefed.sociallinkfedilinkEnglisharrow-up11·5 hours agoYou can get screw removing bits, which are basically that.
minus-squareLexamlinkfedilinkEnglisharrow-up6·6 hours agoNo, this is not the intended use for this type of bit.
Get a Step Bit. Then drill into the screw head until it pops off. I deal with contractors that over torque bolts on a regular basis.
Help me step-bit, I’m stuck and stripped!
Do they make those in a reverse direction so once it gets a bite it can just unscrew?
You can get screw removing bits, which are basically that.
No, this is not the intended use for this type of bit.