I’ve had one of the original green Benriner mandolines for probably 20 years. It still cuts but I’ve notices that it’s starting to tear through the last 1/8 inch of carrot slices instead of slicing all the way through. I don’t use it every day and mever put it in the dishwasher, but that’s still a crazy good run for a blade.

I would consider getting a replacement blade but I also lost one of the julienne blades and replacing them both would cost more than a new unit. I guess if I get the exact same unit, I can have the option of moving the blade to the old unit if the new ones are aomehow flimsy (I haven’t heard of a drop in quality, but I now assume that half the time, newer is shittier).

Any other Benriner fans in the house?

  • evasive_chimpanzee
    link
    fedilink
    arrow-up
    2
    ·
    4 days ago

    Sharpening a mandoline blade is like sharpening a chisel or a hand plane. It’s a lot easier than most knives because knives are usually double beveled (with the exception of most Nordic knives and some Japanese knives) and usually they have some curve to the blade.

    To sharpen a mandolin blade, buy a pane of glass and a variety pack of wet sandpaper (often sold as “automotive”). The glass pane acts as a flat surface, and the sand paper is just a poor man’s replaceable whetstone. Then you can wet the sand paper, and flatten the back side of the blade by just keeping it flat on the sand paper with steady pressure and going back and forth. Then you can work on the beveled side of the blade. The beveled itself is what you’ll use to dial in the angle. You can put some permanent marker on the edge of the blade, and when it’s disappeared, you’ll know you are done with that grit. You then just repeat the process with 2 or 3 grits of paper, getting finer each time.

    This link shows the process for a chisel, though they use an angle guide, which isnt necessary, and they also use rougher grit than you’d want to use. https://www.familyhandyman.com/project/how-to-sharpen-a-chisel/