Hello selhosted, First time posting here, I hope I’m not too much off topic !
I am currently working on my homeserver. I needed some more storage, but said server being a tiny Thinkcentre I needed to get a PCIe card to connect 4+ drives to it. I went with a PCIe LSI SAS 3008e card instead of a PCIe to SATA3, mainly because it allowed me to get to 12GB/s and also because the external mini-SAS connector seemed more reliable and stronger than standard SATA3 cables.
I plugged everything and technically it did work great. Until I almost burnt myself while touching the card. Thermometer on the picture failed to report how hot it actually was because I could not find the right place to put the sensor, but it really did felt like it was above 100°C/212°F. Even without touching directly the radiator, I could not keep my finger anywhere on the card either.
I knew nothing about SAS cards before, needless to say I’m a bit disappointed :( And my Thinkcentre is also too narrow to let me to put a fan on the card, so now I feel like I just got myself a new paperweight haha.
Are SAS cards always running this hot? Or did I bought a bad model? Also for those like me who are running their homelab with tiny computers, how did you achieve connecting 4+ drives to it ?
Thank you for reading!


Hi. Yes they run this hot. Learned after putting one in my consumer desktop computer case and seeing that the drive array kept dying. I child confirm this from the available LSI software which can give you a more accurate temp readout and I wad seeing over 100°c
My solution was not to put a fan ON the card as I don’t have enough room but to put a fan in front of the card that blows towards the back of the case and cools the chip similar to how airflow would work in a server case. I tuned the fan speed to keep the card at a reasonable operating temperature, which for these cars is still kind of high. The 70s I think. I haven’t had a problem in over a year.