I shared a video of the problem, it’s hard to describe with words. Can you help me solve it?

  • JackGreenEarthOP
    link
    fedilink
    English
    11 year ago

    I was able to remove the filament, and I cut some off and reinserted it, but the same thing happened.

    • @IMALlama
      link
      English
      51 year ago

      Is your nozzle clogged? I would remove your nozzle and see if you can extrude cold. If you can, there’s a clog in your nozzle. If you can’t then there’s something upstream preventing filament from moving.

    • @[email protected]
      link
      fedilink
      English
      41 year ago

      Take the nozzle out and see if you can feed the filament through then. That’ll tell you whether it’s a clogged nozzle (most likely) or stepper/bearing/driver issues (less likely).