Compared to bluetooth :

  • 60% lower power consumption
  • Six times higher data transmission speed
  • 1/30th the latency
  • 7 dB improvement anti-interference for a more stable connection
  • Twice the coverage distance, and
  • 10 times more network connections

Notice it’s not talking of compression yet, but raw connection performance.

Due to the US Huawei ban, the tech won’t arrive to the US yet. Nor maybe ever until something is done.

https://consumer.huawei.com/za/community/details/Huawei-Nearlink-launched-new-wireless-technology-far-ahead-of-Bluetooth/topicId_276306/

  • @Vash63
    link
    English
    -11 year ago

    You use 2.4GHz wifi?

    • @[email protected]OP
      link
      fedilink
      English
      31 year ago

      I am sory for not living in a giant home without any 2.4ghz neighbors around me.

      Also I myself use 2.4ghz for low bandwidth devices, and other connected devices which don’t have 5ghz. And there are also the neighbors who cast their 2.4ghz network they may use how they will around me.

      But I didn’t have many issues on most of the headsets I tried. At least higher end.

      There were still some outliers and with bad unreliable connections, even on high latency (jbl tour one m2 for example).

      Others like corsair headsets had issues at “high” range (like 10-15m through walls), but no issues at close range, but that is expected from their specs.

    • OADINC
      link
      fedilink
      English
      21 year ago

      We have both at home, but at school im stuck on 2.4

    • @MeanEYE
      link
      English
      11 year ago

      Pretty much all routers ISP give are 2.4 included so whether you want it or not you are surrounded by emissions at that frequency.

      • @Vash63
        link
        English
        01 year ago

        Mine from the ISP does wifi 6 over 5GHz… I still disabled the wifi in favour of a Unifi multi-AP config.

        • @MeanEYE
          link
          English
          11 year ago

          Even if you have skills and knowledge, people around you might not or simply don’t care. I’d hazard a guess 2.4GHz spectrum is filled.

    • TimeSquirrel
      link
      fedilink
      11 year ago

      Most IoT devices still need it, and it’s actually recommended for those for its better wall/floor penetrating ability, since a light bulb isn’t going to need tons of bandwidth.