Hello fellow withprinters. Whats happening here? Stringing is not the problem, if i print string tests, they are good. Its only in holes, the walls wont stick. Any suggestions for a fix?

Edit: Found the problem. The temperature sensor was faulty. Changed it and now everything is fine.

IMG_20231029_185945

IMG_20231029_185931

  • @[email protected]OP
    link
    fedilink
    English
    41 year ago

    Nope, it should be walls. They just wont stick. How does wipe during infill work? cant find anything in cura or google. I try changing the wall order now, thanks for the tip, could work.

    • @SzethFriendOfNimi
      link
      English
      31 year ago

      Looks at the movement preview. See how the nozzle moves at those layers. But as another said those could be “fake” bridges added to allow sharp overhangs

      • @[email protected]OP
        link
        fedilink
        English
        31 year ago

        Its just printing the walls, nothing unxpected. I changed the wall order like suggested in another comment and hope for the best.

    • @[email protected]
      link
      fedilink
      English
      21 year ago

      Try the “combing” setting “with infill” should drag the nozzle across the infill to wipe any strings away. Be careful with this though as I’ve had it knock prints loose from the bed. This print looks to have a large adhesion surface so it shouldn’t be an issue.