Guys

We have an XYZ DaVinci 1.0 Pro, connected by USB to a Windows 10 PC (latest updates etc.)

The drivers are all correctly installed (both cameras show up in device manager, the printer shows up in device manager as both a printer and a USB-COM3 device).

The printer has Firmware 1.2.3 installed (as recommended by XYZ… not sure if that’s a good thing)

  • XYZ Printing does not detect the printer as online;
  • Cura does not detect the printer as online;
  • Pronterface does not detect the printer as online;
  • In a massive turn-up for the books… Microsoft 3d Builder does see the printer on line and will start a print.

In device manager the com port seems to be set at 9600,8,n,1. Changing this to (say) 115200 breaks printing in 3d Builder. Changing Pronterface to use 9600 baud makes no difference to connecting to the printer.

I have changed the USB lead, tried different ports on the PC yadda yadda yadda but no change at all - only Microsoft 3d Builder will see the printer online and print.

Anyone got any idea at all why everything except Microsoft 3d Builder can’t see the printer?

  • HorseChandelierOPEnglish
    1•8 months ago

    Tried that - no difference.

    Tried setting com port and baud rate in Cura environment for USB Printing NG plug in. No joy (though monitor in Cura stops complaining the printer is offline, it won’t do things like pre-heat the head)

    Real head scratcher.