@4lan to 3DPrintingEnglish • 1 year agoIf it works, it works...imagemessage-square22arrow-up1114arrow-down14file-text
arrow-up1110arrow-down1imageIf it works, it works...@4lan to 3DPrintingEnglish • 1 year agomessage-square22file-text
minus-square@[email protected]linkfedilinkEnglish3•edit-21 year agoI oddly usually have the other problem, my prints stick too good, the bottom of the print is white (though it is black PLA+) and it sometimes deforms my magnetic mat doohickey while trying to pry it free. Drives me crazy.
minus-square@[email protected]linkfedilinkEnglish1•1 year agoI’ll try turning it up, iirc I have been running like 220° for PLA+.
minus-square@[email protected]linkfedilinkEnglish1•1 year agoI meant your extruder’s z-offset it too low not the temperature.
I oddly usually have the other problem, my prints stick too good, the bottom of the print is white (though it is black PLA+) and it sometimes deforms my magnetic mat doohickey while trying to pry it free. Drives me crazy.
Your extruder might be set too low.
I’ll try turning it up, iirc I have been running like 220° for PLA+.
I meant your extruder’s z-offset it too low not the temperature.
Ahh I can try raising it, thanks!