This design allows a gun to be much quieter without a suppressor. It’s fairly simple in its concept. When it’s fired the blast (and noise) is on the rear side of the red piston. Next the piston is propelled towards the case mouth, pushing the projectile (gray cylinder) out of the casing, through the barrel, and into to the target. The piston remains in the casing, crumpling and forming an air tight seal.

This Soviet concept to my knowledge doesn’t have a NATO equivalent there is something similar if you search up Quiet Special Purpose Revolver. Despite the fact it’s reportedly only 110 db loud, roughly as loud as a silenced 22lr.

Three firearms models have been chambered in it the NRS-2 knife, OTs-38 revolver, and PPS pistol. (Shown in order)

Here is it being fired out of the NRS-2 knife gun:

https://youtu.be/vW3ZBLlPz_c?si=UCoCEwzaqVANMcY_ [00:11]

It’s simply a really clever approach to a design requirement, but of course there’s at least three reasons it’s not more popular.

One, the piston system must increase the cost to produce each round.

Two, The ATF treats these as silencers legally. This means each shot come with a $200 tax for anyone in the world’s largest civilian firearms market.

And three, how often does a government or individual need to fire a silenced shot but can’t bring along a suppressor? Is this a solution looking for a problem?

Also heres some more stuff about the NRS-2:

  • @chemical_cutthroat
    link
    English
    571 year ago

    So, you fire the projectile with the knife facing towards you?

    • @FireTowerOPM
      link
      English
      22
      edit-2
      1 year ago

      It does come with a sheath he could have on. But yeah, hopefully 7.62x42 SP4 doesn’t have much recoil. Otherwise our friend here might earn himself an eye patch.

      • GONADS125
        link
        English
        31 year ago

        Could easily see someone losing a fingertip firing it.

    • @cmbabul
      link
      English
      61 year ago

      A prototype of the RX9 knife missle!