• @SpaceNoodle
    link
    -21 year ago

    This should have been an article. What’s the summary?

    • @[email protected]
      link
      fedilink
      English
      11 year ago

      I summarized it above, there’s an extra rotation included when the outer circle moves along the inner circle, essentially falling a bit with every roll forward. If the outer circle rolled along a straight line of the same length as the circumference of the inner circle, it would only roll 3 times, but moving around the circle instead adds exactly one extra rotation. That other gent says this is used in calculating orbits too, where you’re also moving forward while constantly falling

      • @SpaceNoodle
        link
        11 year ago

        I read an article about it. Everybody is doing a shit job of describing what happens. The outer circle naturally makes a full rotation as it travels around the inner one, as the path it follows goes around a full 360°, so that counts as one of the rotations it ends up making, which is in addition to the 3 due to travel around the circumference.

          • @SpaceNoodle
            link
            11 year ago

            Thanks for letting me know! It was too frustrating to not share.

    • @schmidtster
      link
      -3
      edit-2
      1 year ago

      Add the radius together. If the circle is inside. B-A 3-1 = 2.

        • @schmidtster
          link
          -2
          edit-2
          1 year ago

          It’s in the video.

          A circle with a radius of 2 and a circle with a radius of 3 would be 5 rotations.

          • @[email protected]
            link
            fedilink
            English
            41 year ago

            First you said add the radii together, then you gave an example subtracting them, but either way this is incorrect. You divide the larger radius by the smaller radius and add 1

          • uphillbothways
            link
            fedilink
            1
            edit-2
            1 year ago

            Not quite. With radius 2 and 3 circles, the outer circle would take 2.5 rotations to complete the revolution. You have to set the first circle radius to 1 (divide both radii by the lesser) and then add the radii to calculate the relative circumference of the circle drawn by the motion of the center of the outer circle, so the answer would be calculated like:

            2/2 + 3/2 = 5/2 = 2.5

          • @bisby
            link
            1
            edit-2
            1 year ago

            Its not even remotely what you said. Its A/B+1 or A/B-1 for an interior loop.

            edit: I didn’t need to be this aggressive. It’s VAGUELY what you said. its (A+B)/B. You have missed the /B part… which is A/B + 1.

            in the example you gave, for radius 2 and 3… it would be 3/2 + 1 or 2.5. Not 5 (off by a factor of 2 because /B)

            • @schmidtster
              link
              -31 year ago

              They explain multiple ways to do it in the video. A circle with a radius of 2 and a circle with a radius of 3 would be 5.

              • @bisby
                link
                31 year ago

                No they don’t

                N is the ratio of the circles and its just +1 or -1 depending on outer or inner.