Hello there! My friends gifted me an Ender 3 printer, and I achieved my first successful print today! I have a few (probably stupid) questions:

  1. I will store it in my garage, in a shelve among other things. It is quite dusty, so I’m thinking of building a plexiglass hermetic box to keep it while powered off. Would it be a problem to keep it closed also while printing? This would change the type of box I’ll build, because there is not much space and I’m trying to save the most of it
  2. How do I store the filament? I (currently) have only one filament (black PLA), so I see no need to remove it from the printer each time, but leaving it “connected” (I don’t know how to say it) will not allow me to store it in a different way the printer is stored. Do I need to store it in special ways or can I leave it connected? (And bonus question, what is the correct word to say it?)
  3. If I don’t move the printer, how often should I calibrate it?

Sorry if these are basic questions, I’m taking my first steps into this magic world… Thanks in advance!

  • @esc27
    link
    English
    31 year ago

    I store filament in a tight sealing, food grade, bucket with a rechargeable silica gel device, and a cheap hygrometer. The round spools fit well in the round bucket. The silica gel device can be plugged in for a few hours to dry the gel for reuse. Last time I checked the bucket was around 10% humidity in a house around 45%.

    • tubbaduOP
      link
      fedilink
      English
      11 year ago

      This is a good advice! What is the “safe” humidity level?