I love reading on my eInk reader. I think if a had phone where the book I was reading was always on the outer screen, I would read even more. But, is this too niche of a form factor?
I love reading on my eInk reader. I think if a had phone where the book I was reading was always on the outer screen, I would read even more. But, is this too niche of a form factor?
I have an e-ink tablet that runs Android. Copes with most apps and can deliver stuttery video.
E-Ink can’t be far off replacing glass screens (at least as an option) because the benefits for battery life are substantial. But I’d think it would replace them rather than be in addition to. A phone with screens on both sides would be so fragile.
If you haven’t already seen it, and you don’t object to watching YT, check out the video on e-ink on the Applied Science channel. You’ll get a much better idea of the technology and limitations. There is not much of a difference in the underlying display for AMOLED versus e-ink. They are both ultra thin and loosely similar in power requirements. Most of the “display” seen on AMOLED devices is the glass needed for durability, and the capacitive touch sensor. The actual display is buried deep under the glass and is about as thick as a business card.
The way e-ink refreshes information is very different though. It probably won’t get much faster for refresh and there are some big disadvantages when displays are partially refreshed. It is far more efficient to just change the LED’s you need to change in a specific region when there are constant changes happening. The real issue is running software that allows for an off-state-black for AMOLED instead of a dark color. Refreshing an e-ink display requires powering a much larger area. Reliable refresh usually requires powering the entire screen with reverse polarized pulses several dozen times. E-ink used as a display that is constantly changing would take far more power than an equivalent AMOLED.
It doesn’t really matter if the power difference is less than exponential in scope when devices are made to be stalkerware constantly monitoring and sending telemetry data over a wireless connection. The radio transmitter often uses far more power than the screen.