• TimeSquirrel
    link
    fedilink
    510 months ago

    Just don’t fully rely on them for core stuff such as doors, fire alarms

    I am an alarm/automation/access control technician, and I have some bad news for you…

    • @[email protected]
      link
      fedilink
      English
      210 months ago

      I would genuinely like to learn about how you deal with stuff like malfunctions and backup door unlock methods. But now I don’t really want to discuss much because of health issues. Hopefully you all won’t consider me a bad person who likes to argue

      • TimeSquirrel
        link
        fedilink
        710 months ago

        Usually, if a building has electronic access control, it’s a requirement that the main controller or power supply be directly tied into the fire alarm with a hardwired trigger relay to drop power to all the door locks during an alarm. It may all be controllable and configurable on the cloud, but commercial equipment still has traditional redundancies like standby batteries and the like.

        • @[email protected]
          link
          fedilink
          English
          110 months ago

          What if there’s a gas explosion or another case that causes loss of connection between the system and the doors? Is it possible to open them manually in such cases?

          • 𝒍𝒆𝒎𝒂𝒏𝒏
            link
            fedilink
            English
            4
            edit-2
            10 months ago

            Not the commenter you replied to, but these kinds of systems are usually “fail open”: if there is unexpected loss of power (including the locking mechanism connection to the controller being interrupted), the door is released/unlocked, and can be opened manually by users.

            Some more complex systems will have specific doors automatically shut in the event of a fire to try and keep it contained, depending on local regulations. These doors can still be manually re-opened, but they will not “catch” or latch open until the system fault is resolved

            Edit: add clarity

          • TimeSquirrel
            link
            fedilink
            4
            edit-2
            10 months ago

            If the door has no means of mechanical egress, for example, a maglock, then it is required to have a second form of egress that cuts power to the maglock, such as a normally-closed exit button. Maglocks naturally unlock when losing power. Electric strikes and locksets can be set up fail-safe or fail-secure.