I use nftables to set my firewall rules. I typically manually configure the rules myself. Recently, I just happened to dump the ruleset, and, much to my surprise, my config was gone, and it was replaced with an enourmous amount of extremely cryptic firewall rules. After a quick examination of the rules, I found that it was Docker that had modified them. And after some brief research, I found a number of open issues, just like this one, of people complaining about this behaviour. I think it’s an enourmous security risk to have Docker silently do this by default.

I have heard that Podman doesn’t suffer from this issue, as it is daemonless. If that is true, I will certainly be switching from Docker to Podman.

  • @warmaster
    link
    English
    13 months ago

    Ok that sounds intetesting, I’ve found Cockpit easier to use than Proxmox, I’m new to virtualization and I don’t want do nesting… I fear it will complicate things when I’ll need to do GPU passthrough.

    How is Podman integrated into Cockpit?

    Also, I had so much trouble trying to bridge my Home Assistant VM to my LAN. Are there any tutorials on how to do this from Cockpit?

    • @Molecular0079
      link
      English
      13 months ago

      Your containers show up in Cockpit under the “Podman containers” section and you can view logs, type commands into their consoles, etc. You can even start up containers, manage images, etc.

      Are there any tutorials on how to do this from Cockpit?

      I have not done this personally, but I would assume you need to create a bridge device in Network Manager or via Cockpit and then tell your VM to use that. Keep in mind, bridge devices only work over Ethernet.

      • @warmaster
        link
        English
        13 months ago

        bridge devices only work over Ethernet

        Yes, I want to reach my HA VM from my LAN connected devices.

        • @Molecular0079
          link
          English
          13 months ago

          Cockpit definitely has the ability to create bridge devices. I haven’t found a tutorial specifically for cockpit, but you can follow something like this and apply the same principles to the “Add Bridge” dialog in Cockpit’s network settings.