• @[email protected]
    link
    fedilink
    19
    edit-2
    8 months ago

    Until you find out that a usbc plug fits inside a usba port and you can mix them up when reaching around your computer. (Don’t test this on anything that is powered on, I did it on accident once and it triggered my motherboards usb overcurrent failsafe)

    • @[email protected]
      link
      fedilink
      178 months ago

      Did this (on purpose) to HP laptops we were discarding at work (Elitebook G5) and you kill the entire USB-A part of the machine.

      10/10 would HP again

      • @[email protected]OP
        link
        fedilink
        68 months ago

        Likely RIP PCH (or the CPU, if those 2 are combined). That’s kinda weird they don’t install protection on USB ports 'cause those are like 20 cents (at least judging by those in my t480). On the other hand, HP’s gonna HP

      • @[email protected]
        link
        fedilink
        38 months ago

        My cheap AM3 motherboard doesn’t cares about USB short circuts. So it’s HP’s deliberate miscalculation.

        • voxel
          link
          fedilink
          38 months ago

          same with my old lenovo laptop, i shorted both the power and data pins literally hundreds of times while tinkering with microcontrollers, and all it did is disable the ports until a reboot

        • @[email protected]
          link
          fedilink
          2
          edit-2
          8 months ago

          It is definitely HP just being HP.

          Other non HP machines we have are just fine if you short the USB-A ports

    • @[email protected]
      link
      fedilink
      18 months ago

      Duude I tried blindly plugging in a USB-C at the back of my PC ones, I was like “Aha, gotcha” and then my PC just shut down. First came confusion, then I realized it wiggled left and right. That was incredibly scary, luckily ASRock has good protection circuits so nothing happened.

      But I sure as hell haven’t blindly plugged in USB-C since then.