I keep injecting into the wrong spot. Usually how I know is it feels harder to push the plunger down on the syringe. And I bleed a little upon removal. How I find the spot is I feel different spots on my leg to see if it flexs, I find the spot and mark it. Disinfect it and inject. Usually turns out fine but these past two times I’ve been bleeding and harder to press down the syringe (as stated) and I don’t know what to do.
I’m no doctor, so bring your grain of salt to this comment.
If you’re running into some pressure when initially pushing the needle in, by my experience, that can be expected from time to time. I try really hard to ensure my muscles are relaxed when injecting, but sometimes it’s a little harder to do the initial push.
If you’re running into some pressure when pushing the plunger to actually inject (which is what your post says), there could be a few things happening:
you might be hitting old scar tissue from previous injections. If you’re doing your thigh, make sure you’re switching legs each week and not picking the same spot each time.
what’s your needle gauge? I have good luck with 22G. If you’re using something smaller, the fluid is going to have a hard time making its way in. I wouldn’t go bigger than 20G though, especially if you’re worried about bleeding.
what’s your needle length, and (putting this the kindest way possible) how thick are your thighs? Your needle might be the wrong length for your body type. My partner uses 1 inch needles, but I use 1.5 inch (for gluteus injections). Length matters.