Idk if this is the right instance for this, but how fucking tired of these forced ads at gas pumps is everyone else?

I’m paying 4 bucks a gallon to have you shove advertising down my throat like an erect cock?

What the actual fuck

Anyone have any good ad blocking practices for this?

I’ve seen duct or painters tape covering the speakers…

You can press a button next to the screen to mute it, but this doesn’t work at all gas stations. (Usually its the 2nd from the top on the right side)

I guess its just time to gettoblast music every time I pump gas like back when I was 19…

  • NoSpiritAnimal
    0•2 months ago

    They do engineer the pumps to ground the static charge. That’s what can cause the arc.

    You discharge yourself the first time you touch the pump before you fill up.

    Getting back into the car defeats the purpose by then grounding you in the presence of fuel vapors, rather than before.

    • Dark ArcEnglish
      0•2 months ago

      What you’re saying doesn’t make any sense. If you’re engineering something to prevent a spark from a static charge, you engineer it to prevent a spark from a static charge. You don’t engineer it to “ground you at first and then fail” if you pick up a static charge for some reason.

      EDIT: And there are a lot more ways to become statically charged than getting in and out of a car (which in a lot of cases isn’t going to give you a static charge anyways – e.g. leather seats on cotton clothes is extremely unlikely to generate a static charge).

      • NoSpiritAnimal
        0•2 months ago

        Yes, which is why the recommendation is to keep your hand on the handle while pumping or touch a metal part of your car prior to returning to the pump, and don’t get back into a car.

        I have a real life degree in automotive technology and engineering, and you saw a Mythbusters episode.

        We can keep doing this forever if you like, but you’re still very poorly informed on how safety is engineered into your vehicle fuel system and the mechanisms that support it.

        Here is some reading to help you, API recommended fuel procedures (if you’re not familiar with the API just read any gas pump or bottle of oil until you are): https://www.api.org/oil-and-natural-gas/consumer-information/consumer-resources/staying-safe-pump

        Most important, motorists should not get back into their vehicles during refueling. It may be a temptation to get back in the car for any number of reasons. But the average fill-up takes only two minutes, and staying outside the vehicle will greatly minimize the likelihood of any build-up of static electricity that could be discharged at the nozzle.

        • Dark ArcEnglish
          0•2 months ago

          I have a degree in computer science, I’ve worked on electrical engineering projects, my father is an electrician, I have a close friend and mentor that’s a forensic electrical engineer, etc.

          If y’all in the automotive space think this is a real problem, fix it. It is trivial to shield something from static electricity; TRIVIAL. Frankly it’s unacceptable it hasn’t been fixed if you’re so adamant there’s a serious risk to the public.

          This reads to me as an “ass covering” article for a very very very rare event. At 1/10,000,000 estimated probability I’d have to live thousands of lives at the rate I fill up my car to ever see this.

          I’m not going to worry about this more than I’m going to worry about winning the lottery or spontaneous combustion frankly; the probabilities do not warrant concern. Which I’m sure is the real reason nothing has been done here.

          • NoSpiritAnimal
            0•2 months ago

            Citing your dad’s job is a wild way to claim expertise.

            • Dark ArcEnglish
              0•2 months ago

              I question your ability as an engineer if you can’t understand how to shield something from static electricity. Hint: use non-conducive material to create an isolated ground that never makes contact with the gasoline, they’ve been doing it for all kinds of sensitive electronics for decades. This technique is also used to prevent your metal kitchen mixer from killing you if there’s a short.

              Am I “the expert” in this domain? No. Do I have plenty of exposure to it and other engineering disciplines to make a judgement call on the facts; absolutely.

              • NoSpiritAnimal
                0•2 months ago

                Watch out entire industry that’s been operating for more than a century, Dark Arc’s dad is an engineer and he has correctly interpreted the facts you can’t even seem to grasp.

                Quick, now do perpetual motion! Those simpletons have barely even tried.

                Not that this will mean anything to you, but this feels a lot like when someone says “why don’t we just run lean so we save fuel?”.

                • Dark ArcEnglish
                  1•2 months ago

                  🙄

                  Thank you for your concern for my safety. I’m not interested.

                  My advice to you is, if you’re worried about this, never get in a car again.