I have a unused RPi4 (the 8Gig one) running DietPi. I did use it as a playground but ever since I am renting a Hetzner machine for (playground) stuff that I want web accessible, I don’t have particular use for the Pi.
I am currently running (outdated) Home Assistant on it but there isn’t much I can connect it with (yet, getting the flashable/compatible ikea smart lightning zigbee? bridge thingy is on my bucket list). Obviously I do have a pihole there.
Shoot me any other ideas I could run there. Some kind of monitoring of my rented infra would be cool (I already have uptime kuma on the dedi hetzner box). One idea I had was if there are some OSS security scanning “daemons” I could use on to monitor my other infra.
Thanks a lot!
- Wireguard + wireguard-ui
- Linkwarden
- Filebrowser
- Dockge
- Trilium
- Paperless-ngx
- OCIS
- AdGuard Home
- Jellyfin
- Rocket-Chat
- Vaultwarden
- Mailcow
That’s my actual mess.
I wish you hadn’t posted this \s. Now I have so much more to play with on my server. Great software here!
Thanks for sharing! The only thing I’m surprised to see in your list is paperless - how long does OCR take on a pi?
About a minute, 1:30 maybe (edit: per page on a pi4). I use an app to upload jpegs though, I don’t have a normal scanner at the moment. The higher quality scan and smaller file size may make some steps of the process quicker (no need for alignment and color correction for example) if you use a normal, proper scanner.
It doesn’t matter though. When I get home and see I got a letter I scan it and by the time I drank something, put away my clothes and stuff i had with me, the pi is done and I can edit the metadata in the web ui.
Thank you! That’s really interesting, the performance with a pi 3 was way worse - even more than the pure spec difference would’ve lead me to believe.
The OCR devs have made a really awesome job!
I have a pi4, 4GB. And running off of an SSD (connected via SATA to usb adapter). Sorry, forgot to specify.
Even slower would still be worth it IMO, digital document management is just so much better than keeping multiple folders of paper organized. Also I can access all my paperwork from anywhere, because the pi and my phone are both in my wireguard VPN network.
Yes, had some cool moment a few days ago, boss asked me face to face if I did this special training 5 years ago.
I took my phone out, open paperless, did a full text search and tada, there it is. The cert for this one.
Idk, exactly I put near 500 pdfs in it, and after 3 days it was complete
Wait aren’t the system requirements for Mailcow crazy high? How can you run it + other software on a mere Pi? Also: do you have a static IP?
Yes, that’s correct, mailcow runs on a vps outside with a static IP, I missed that op only asks for RPI hosted.
Most people seem to just want to use RPIs as a very slow Linux server for some reason…
Use it to play around with hardware integration with the GPIO pins. Get a sensor HAT and start recording temperatures, write some code that turns on/off an LED, build a robot controller, etc. There are lots of kits and documentation on the various things you can do!
I’ve been wanting to use multiple raspberry pi zero w with sensory hats to feed data to a central home monitoring system. Would be a fun project.
It is! Especially if you want to write the code yourself. It’s an interesting design problem if you start to consider cases where the PI may be offline (mobile on a battery in my case). Do you lose that data? Store and forward? In memory or to a local data store? It’s a fun rainy-weekend project.
Word of caution - HATs can be a rather inaccurate in their temperature monitoring. The Pi gets warm. I had done my work using a PTC thermistor that was distanced from the Pi itself. I’ve got a friend using a HAT and it’s been very off (up to 10C above ambient!). A Pi Zero may not give off as much heat as, say a Pi4 though. YMMV.
SBCs like the RPi are kind of awkwardly in-between a microcontroller like an Arduino or ESP32 that you can actually trust with handling GPIO and data logging, and a real Linux system that can actually do meaningful computational work.
Pretty much the only task I’ve found them reliably appropriate for is running OctoPrint, really really light computer vision tasks for robotics, or hooking up an RTL-SDR to use as a police/HAM scanner. Outside of those, it’s so much easier to use either a cheaper and more reliable MCU or a much more powerful old laptop or desktop.
That’s one of the nice things about them.
You can write code that has access to more resources. I had a RPI once that showed code build status on an led strip (red failed, green passed). It was a Java program that connected to AWS SQS for build event notifications. A micro controller would be much harder to do that on.
Unluckily last time I wanted to do sensor stuff the ~20 euro air quality multi-sensor (co2, pm1-10, humidity, voc?) board got lost in transit and I didn’t bother since :(
The original plan was use it with my esp32 dev board (wroom32, so wifi) to have a portable sensor, this RPi was supposed to be the collection server (mqtt, influx, grafana).I should revisit this idea soon, thanks for reminding me!
Grab yourself an antenna and filter and feed adsbexchsnge, flightaware, and flightradar24.
Uhh, this seems like a completely new rabbit hole to dive in.
This! Im planning on getting this set up on a spare pi one of these days™. You get a free premium acc on the tracking sites, so you can track where tf all those planes and helicopters above your house are going
I used RTL-SDR dongle and it basically just worked! Also got some recordings of the nearby airport, really cool !
I did this for a hot second (already have RTL-SDR set here) but the current location of the RPi is just bad for reception and moving it closer to some window would mean connecting through wifi (can’t lay ethernet cables, renting) and that’s bad for other services where low response times are preffered/needed (pihole) :(
Instead of connecting it to WiFi, have a look into power line adapters. They route your internet through the copper wiring in your house.
I have a router in my subterranean ground floor linked to a power line adapter, a wired router in my front room a floor up so my PC, TV, Playstation, etc are connected via LAN, and another power line 2 floors above that plugged into another WiFi router running in bridge mode, which supplies WiFi to the top two floors, and another playstation wired in to that router
Basically it means that my ground floor router is hooked to the internet and everything else in the house that needs wiring in is wired in because of the power line, and the WiFi is coming from 2 routers, one on the top floor and one on the ground.
My ISP thought a WiFi router on the ground floor of a 4 storey house was a great idea, but they’re stupid. WiFi should be in the highest point of your house.
With a few Power line adapters you can sort your internet out for £25
To report back, my system is up and running. Used my spare odroid xu4 with dietpi for it. Put it all in a case and attached a cheap Nooelec stick. Waiting for my antenna today and to decide where to put it under the roof.
Fine tuning for best reception location will be taking a while to be honest.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters AP WiFi Access Point CGNAT Carrier-Grade NAT DNS Domain Name Service/System HA Home Assistant automation software ~ High Availability IP Internet Protocol LXC Linux Containers NAT Network Address Translation PiHole Network-wide ad-blocker (DNS sinkhole) PoE Power over Ethernet RPi Raspberry Pi brand of SBC SATA Serial AT Attachment interface for mass storage SBC Single-Board Computer SSD Solid State Drive mass storage VPN Virtual Private Network VPS Virtual Private Server (opposed to shared hosting) Zigbee Wireless mesh network for low-power devices
14 acronyms in this thread; the most compressed thread commented on today has 9 acronyms.
[Thread #439 for this sub, first seen 19th Jan 2024, 13:45] [FAQ] [Full list] [Contact] [Source code]
Vaultwarden password manager
Vaultwarden is super, but I’d be hesitant to run it on a Raspberry Pi unless I had good backups in place. I’ve always run stuff off MicroSD cards with Pi’s, but I’m sure there’s a way to use real drives which would make me feel better.
You could just plug an external drive in it
You don’t need permanent backups of it. Vaultwarden is more like a secure “syncthing”. I crashed a system with vaultwarden had to rebuild everything but after connecting it to my devices I got the passwords from them back again and nothing was lost.
Yeah that’s true, your devices will still have a cached copy. Still… losing the host would be a pain. It looks like (from the browser extension at least) I can export the vault, so maybe it’s not as bad as it seems.
It has some amazing caching, but that doesn’t mean a backup is not necessary or recommended.
I’m running mine off an SSD using an M.2 to USB adapter
A tor guard/middle relay or bridge/snowflake and i2pd node.
I might have a look actually, though if any of these require publicly accessible IP then that won’t be possible because of CGNAT :(
Snowflake and i2pd could work but not in the best conditions.
A local jellyfin installation so you can watch/listen to your media even if your internet is down.
Donate it to your local school.
I ran HA on mine for a while before I moved it to a VM. Right now I’m using my Pi as a secondary wireguard VPN in case my primary is down for some reason.
Also, quick tip, I found that ikea zigbee bulbs work really well but have really bad coil whine when off, don’t use them for bedside lighting.
try Jackett + sonarr + radarr + qBittrorrent or sell it
I run a modded Minecraft server for my friends, PiHole for my home network, DDclient, and a discord bot for my discord server on a RPi4 8GB. I also use another as an emulation station.
RPi4 + USB Storage works as a network connected backup space for home PCs. With dyndns and a split vpn tunnel I imagine you could have your Hetzner machine place backups there too.
Seems both nagios and zabbix work on RPi:
https://peppe8o.com/network-monitoring-with-raspberry-pi-and-nems-nagios/
https://bestmonitoringtools.com/how-to-install-zabbix-on-raspberry-pi-raspbian/Already got ssd as a nfs share in my openwrt-based router before that I did have it set up on the rpi. I did want to do offsite backup into that disk originally but I’ve got “only” ~100Mb/s up/down speed here so I didn’t want to risk slow-downs etc (but now that you remind me, borgbackup should be rather light on traffic!).
NEMS being a whole OS is a pitty, I like the possibility to have multiple different services there.But you are absolutely right I could have a offsite resource monitoring for my Hetzner setup with these, thanks!
You can also install Nagios the traditional way with apache instead https://www.howtoraspberry.com/2021/05/how-to-install-nagios-on-a-raspberry-pi/
The port 9090 nems UI is based on Cockpit and just an apt install away https://cockpit-project.org
Immich! It’s an amazing self hosted Google Photos replacement.
Zigbee definitely fun with HomeAssistant. I have an SLZB-06M adapter which has PoE (important for me) and is a fairly “open” product (don’t need to jump through hoops to flash firmware). I read somewhere that it may offer Thread support at some point but wouldn’t count on that.
Someone posted the code for circadian whole home lighting, running on a pi not too long ago. Might be kinda cool to try out.
deleted by creator
