The #Razer #Junglecat is a truly great smartphone controller that has one big flaw - it supports 3 or 4 phones.
Luckily, #3dprinting (and #openscad) to the rescue!
Lo and behold, #RazerJunglecat on my #GalaxyS23Ultra!
Could be worse. You could have the Moto Gamepad Mod, which only supports one phone. (Well, three if you want to count all three generations of the Moto Z series phones.)
Yes, I have one. Why do you ask…?
@dual_sport_dork Should still work with some custom 3D printed adapter, shouldn’t it? But it definitely looks harder to create the adapter than a case.
Negative, unless your phone has the connector pads on the back for Moto Mods, which only the Z series has. The controller has no other way to connect to a phone.
@dual_sport_dork Ah, good old vendor lock-in.
My solution was to just print a thing that I could clip to my preferred Bluetooth controller and hold my phone in place.
I just use a DualSense but this makes me want to design one around a pair of Switch joycons.
@Kolanaki Take a look at https://github.com/SiloCityLabs/Cuttlephone - it’s an OpenSCAD parametric design where you “just” need to measure your phone correctly and then render and print it. That’s how I did mine. It has support for hard cases (PLA, PETG and so on), soft cases (TPU), Junglecat controller and Switch JoyCons.
Ooo… It even uses the rails. I was gonna be way less sophisticated (and end up using more filament) lol
I actually make junglecat cases for the Samsung z fold series!
I plan to make more for other phones too.
I sell my stls and prints https://frogcase.store/products/z-fold-3-junglecat-controller-case
These controllers are super cheap since the 3 phones it works with are so old now. You can get them for like $30!
Amazon when I got mine, always check the other seller options sometimes they hide better deals
deleted by creator
 [#Junglecat](https://phpc.social/tags/Junglecat) is a truly great smartphone controller that has one big flaw - it supports 3 or 4 phones.](https://media.phpc.social/media_attachments/files/111/930/333/479/258/022/original/e0c543402ea1e7b4.jpg){kind=link}