I’ve been having this issue very sporadically (sometimes a couple times a week, sometimes once a month). I’m curious as to how the more veteran folk here would try and narrow down the cause of this issue.
I can provide more info if needed!
Edit: More Info:
- Using a static IP (no DHCP) through Netplan.
Check if there’s some weirdness in IP allocation. A reboot can cause DHCP to give it a new one that works as long as it does, then fail on some weird collision.
I forgot to mention that I’m not using DHCP, statically allocating a local IP
There might still be another device on the network that is using DHCP and is getting an IP that conflicts. Do you have any visibility on the rest of the network, IP addressing, DHCP leases etc? I would check there first for a potential easy fix.
Hey thanks for the suggestion. It’s the only client on this modem/router. I have a dedicated internet for it. So there shouldn’t be any DHCP conflicts. I will double check to see if anything else is on that network and double-check the range of assignable IPs
Is there a DHCP server at play? Is the static IP outside of the DHCP range? This does sound like a typical IP collision.
DHCP is enabled on the router, but I believe the IP address is outside the designated DHCP range.
I’ll double check when I’m home!
Edit: I will also say that this modem/router is dedicated only for the server, so there shouldnt be any other clients on it at all.
This might not be applicable to your use case, but maybe it helps.
Couple of years ago I had a problem where ONE windows laptop was unable to access the internet. Sometimes it would work right away, sometimes it took 1 or 2 reboots, sometimes the damn thing wouldn’t budge.
lo and behold, it turns out the windows laptop was assigned a DHCP address that one linksys router had as a static ip. Why that resulted in a sporadic error and not a constant one I’ll never know.
So next time you have this issue, rip out the network cable from the server and try to ping the ip the server is supposed to have.
Other than that, check the journal if something start to pop up around the time you experience the problem.
Thanks for the suggestion. So I have the static IP assigned with DHCP disabled both through Netplan, not through the router.
I’ll remember to check the Netplann (?) journal/logs around that time, or are you referring to dmesg?
Since you’re not really sure what the issue is, check all the logfiles around the time the problem starts. maybe you’ll see a service stopping or starting.
Thank you I’ll do that! It’s hard to catch exactly when it happens. I think I need to get some monitoring and alert services up and running
Are you able to access the server’s Linux shell via KVM or out-of-band management during the Internet outage? If so, I would first check the kernel log for any errors. I’d then follow up with a PING to the local gateway within the same IP subnet to validate Ethernet connectivity. After that I’d start performing PINGs and traceroutes to subnets beyond the local gateway to see what’s going on with tcpdump capturing all interface traffic in the background.
I am able to access the Linux shell locally or on the local area network. From within I can ping the gateway, but nothing beyond that.
Is there a tracert equivalent for Ubuntu?
I will say I get this error when trying to ping www.google.com:
ping: unknown hostThe tracert equivalent that I use would be traceroute or mtr. If you can get a response from the gateway and access the server locally, it would indicate an IP routing issue as local subnet traffic is working.
Instead of pinging a domain name, what happens if you ping a public IP like Google DNS (8.8.8.8)? The error you’re seeing could be related to a DNS resolution issue although that should not affect access to your server.
Ill try that next time it hiccups. I was thinking I should have pinged an IP address after I was pasting the unknown host error 🙃.
In further hindsight I shouldn’t have restarted the server so I could try the things during our conversation. 🙁
check that nameservers are specified in /etc/resolv.conf
Good idea. I’ll check that
if ping fails with the name but works with 8.8.8.8 then you’re losing DNS. set the nameservers locally on the server if you’re using a static IP.
I do have nameservers (8.8.8.8 being one of them) set in my Netplan config, if that counts.
it should - I think (I am not familiar with netplan) - but from what I can tell it it’s a utility that simplifies the local config tasks, when you apply it, I think it should be putting the nameservers in /etc/resolv.conf - but before you go down this rabbit hole, check whether 8.8.8.8 or 1.1.1.1 respond to a ping when pings to named servers don’t - if so, it’s definitely name resolution (which would be my first guess).
Thank you, I’ll follow this advice next time it decides to cut the internet off.
Honestly I would replace Ubuntu with an actual operating system designed for servers.
tbf i’m using ubuntu server because I’ve been using it on and off for a decade. Overall I’ve had no major issues. And its long-term support is one of the longest.
There’s the thought of going RHEL-based which I have experience with from work too, so that is an option in the long run.
I have a TP-Link HS300 that connects to a AP running openwrt, at any moment I can wireguard to AP and use Kasa APP to turn on/off any machine (not the AP though).
There is a Python package for kasa so one can use openwrt machine to detect if machine is down and automatically switch on and off if needed.
I was thinking of something like a local script to reboot the PC once internet isn’t reachable after 5 min or so, but only as a stopgap/workaround until I figure out the issue.
Can you pinpoint the exact moment when the internet cuts out? Have you checked your logs (
dmesg,/var/log/syslog,journalctl, etc) around that time for anything weird?Unfortunately not. It’s really exposing my need for a health monitoring service like TIG stack or something equivalent.
