• @jordanlundM
    link
    English
    636 months ago

    You would think it would be possible to just swap out the currency mechanism and not the entire machine. Seems like there’s an opportunity there somewhere…

    Alternately, get a bill exchanger. New bill goes in, old bill comes out.

    • @[email protected]
      link
      fedilink
      English
      646 months ago

      In Europe, we changed to the Euro not that long ago. I was a student and I used to use a shared laundry machine. It was the day before returning to school. I was barely alone in the dorms. Let’s do a laundry !

      The machines were updated to get euros. There was another machine just to change the coins, especially since the washing machines only took one kind of coin (20 cents).

      I put one fresh euro in the exchange machine, expecting to get 5 coins of 20 cents.

      Tching. Tching. Tching. Tching. Tching. <pause>… Tching. Tching. Tching. Tching. Tching. <pause>… Tching. Tching. Tching. Tching. Tching. <pause>…

      What ?! The machine was buggy and would not stop. I grabbed a hoodie to put the coins in it. Soon, it was not enough. After what seems to be an eternity I was there with around 50€ and kilos of coins.

    • @Linkerbaan
      link
      English
      256 months ago

      These machines probably run on floppy disks.

      In Japan tech is either cutting edge or ancient scrolls

    • NaibofTabr
      link
      fedilink
      English
      25
      edit-2
      6 months ago

      Yeah this really shouldn’t be that difficult. Pop the old bill reader out and swap a new one in. It seems like there’s a pretty big financial incentive for someone to figure out how to implement that, at least for the most common vending machine models.

    • @jeffwOP
      link
      English
      156 months ago

      I was kinda surprised by the article since almost every vending machine I see takes credit cards. I’ve never used a vending machine in a Ramen shop though

      • @aeronmelon
        link
        English
        166 months ago

        Most vending machines take IC (the NFC-style top-up cards that Japan also runs on), but ALL vending machines take cash.

        It should be possible to swap out the reader, but they might be built in such a way that the entire machine has to be taken away and cannot be serviced on-site for security’s sake. I have never seen anyone servicing a vending machine in public.

        This could be something that causes Japan to rethink its cash dependancy.

        • mbfalzar
          link
          fedilink
          English
          86 months ago

          I see people servicing vending machines in public all the time, but the ones out in the city it happens at 2-5am. The ones in my building, it’s roughly weekly at noon. Most of the ones I pass with any regularity don’t have any IC functionality, but we still keep a Waon card around for when we’re visiting nearby cities

        • mbfalzar
          link
          fedilink
          English
          15 months ago

          Hey! I know it’s been a couple weeks but I figured I’d say that I went down to the lobby at 10am just now, and there’s two guys in there right now swapping out the cash reader. There’s the regular restocker doing his job and a second guy with one of the handheld firmware loader things, I’m not sure if it just needs a software change or if he needs to be there to swap the actual slot, but it does look swappable

    • FuglyDuck
      link
      English
      86 months ago

      I’m getting Y2K vibes,

      • @jordanlundM
        link
        English
        166 months ago

        It’s funny you say that, because this scenario was how I explained it back in the day…

        Imagine the US comes out with a shiny new quarter, it’s super cool, but won’t fit in any existing coin slot.

        Upgrading one machine isn’t too bad if you know what you’re doing, but then doing every machine on a block, or a street, or a city, or a state? Suddenly way more complicated.

        Oh, and they ALL have to be done by a specific date.

        • FuglyDuck
          link
          English
          156 months ago

          my dad was a UNIX sysadmin. His assertion- at the time- that we’d be fine, did not live up the vast amounts of overtime he put in in during '99.

          (To be clear it was never the then-modern systems, like windows ME, or '95 that were at problem. it was all the old-as fuck stuff… every major institution still uses. Like IRS’s COBOL database… that’s… still being…used.all of that stuff, they needed to patch to make it okay.)

          • @TexasDrunk
            link
            English
            186 months ago

            Just wait until 2038. More overtime!

            • FuglyDuck
              link
              English
              9
              edit-2
              6 months ago

              he just retired this year!

              (so… uh… what happens in 2038?) (edit… I’ll worry about 2038 if we actually get to 2030.)

              • @Serinus
                link
                English
                226 months ago

                Unix time starts January 1st, 1970 and counts the number of seconds since then.

                Right now it is 1718265480 (approximately).

                That’s stored in a 32 bit signed integer. It hits max int in January of 2038.

                Unix timestamp gif of rolling over in 2038

              • @Archer
                link
                English
                106 months ago

                UNIX epoch limit. Date goes back to 1970

    • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️
      link
      fedilink
      English
      4
      edit-2
      6 months ago

      Depending on the age of the machine, you could maybe just update the firmware. I mean, what’s it comparing the bills put into the machine to? Data hardwired into it or a file stored somewhere that can be changed?

      • @Zekas
        link
        English
        46 months ago

        We also assume the manufacturer still exists, which isn’t guaranteed after 20 years

      • @SlopppyEngineer
        link
        English
        2
        edit-2
        6 months ago

        It’s the cost of doing so that’s their main worry. And the ramen now traditionally is ¥1000. Doing all the changes would mean raising prices above that number and they’re afraid it would keep customers away.

  • @[email protected]
    link
    fedilink
    English
    22
    edit-2
    6 months ago

    Among the most reliant on the machines are ramen shops, which serve one of the Japanese working class’s favorite, most affordable meals.

    Ramen, wheat noodles in a richly flavored broth, became an integral part of Japanese cuisine after being popularized in the 1980s as the country’s economy took off.

    So after Japans economy took off, cheap affordable food for the working class became popular? Guess someoneclass didn’t see those gains.

  • AutoTL;DRB
    link
    fedilink
    English
    156 months ago

    This is the best summary I could come up with:


    Among the most reliant on the machines are ramen shops, which serve one of the Japanese working class’s favorite, most affordable meals.

    Ramen, wheat noodles in a richly flavored broth, became an integral part of Japanese cuisine after being popularized in the 1980s as the country’s economy took off.

    On a recent Tuesday afternoon, students from a nearby university filed in for a late lunch at Mr. Nishitani’s nine-seat shop, Goumen Maruko.

    Analysts at Tokyo Shoko Research said that 45 ramen restaurants nationwide had filed for bankruptcy last year, the highest number since 2009.

    When Japan released its last set of bills in 2004, modifying the vending machines and issuing 10 billion new bank notes cost hundreds of millions of dollars.

    By the summer of 2023, only about 30 percent of drink vending machines could accept the 500 yen coins introduced in 2021, according to the Sankei Shimbun, a Japanese newspaper.


    The original article contains 805 words, the summary contains 151 words. Saved 81%. I’m a bot and I’m open source!