I was thinking of getting a wifi card like that, but can’t seem to find any.

  • @j4k3
    link
    English
    325 months ago

    Use libre boot website’s info for reference. The Athero cars were the only open source option. They are from the aughties. That is your only option. It is the same for hardware - libre boot stuff with a Core Duo era processor, nothing newer is trusted hardware.

  • youmaynotknow
    link
    fedilink
    165 months ago

    For something relatively fast, I suggest you stick to Intel chipsets, and avoid realtek like the plague. As others mentioned, you can go with Atheros, but your speed will certainly suffer, as well as probably breaking the ability to put the computer to sleep with S3.

    I understand you would rather go with 100% FOSS, but this carries trade-offs.

      • @[email protected]
        link
        fedilink
        14 months ago

        I personally don’t recommend the ath9k cards. There are a handful of routers they do not work with. You’ll have to disable QoS to stop the packet drops.

        • @[email protected]
          link
          fedilink
          14 months ago

          that’s funny because my (wired) ISP router already has this problem, I can’t use ssh without setting IPQoS=0

        • @[email protected]
          link
          fedilink
          10
          edit-2
          5 months ago

          ath9k supports N, so I’d consider it modern at least, since I think the vast majority of the population still use it.

          • @[email protected]
            link
            fedilink
            English
            6
            edit-2
            5 months ago

            N is not modern in any sense of the word. I think 6 is more used then you would think. All ISP I know are giving out 6 access points and have for awhile.

            • @[email protected]
              link
              fedilink
              1
              edit-2
              5 months ago

              I install residential and business internet for a living and I have yet to encounter a single AX AP operating in the wild (yes I check every time, and yes my devices support it). And our own routers only do N.

              • @Aux
                link
                35 months ago

                Are you sure you’re living in 2024?

              • @TwanHE
                link
                35 months ago

                We are already having wifi 6 routers being replaced with 6e capable ones.

                Just don’t ask about how few of the devices used actually support 6ghz.

  • @[email protected]
    link
    fedilink
    125 months ago

    Even if so, it would likely still have proprietary blobs, just embedded into a ROM or flash chip on the card. Personally, I’d rather have firmware loaded at runtime over hard-coded, at least then the blob is able to be reverse engineered possibly.

  • @[email protected]
    link
    fedilink
    95 months ago

    I got an Atheros card, which is fine for WiFi on Debian 12 and was cheap to buy. Drivers were in the Debian foss repo. Bluetooth is not working on it though. Interestingly, the Bluetooth did work under PureOS but I never figured out why.

    • Strit
      link
      fedilink
      35 months ago

      Interestingly, the Bluetooth did work under PureOS but I never figured out why.

      The bluetooth probably needs a non-free firmware blob, as most of them do.

      • @[email protected]
        link
        fedilink
        15 months ago

        Yeah maybe. I would expect PureOS to come with less non-free components though, being that it’s endorsed by the FSF. I was quite surprised that BT was not working after switching to Debian.

  • @Reddfugee42
    link
    75 months ago

    You could always get an Ethernet-connected AP. This will allow you to use the latest WiFi but not compromise your OS.

      • @Reddfugee42
        link
        65 months ago

        That’s the beautiful thing - it doesn’t matter.

          • @Reddfugee42
            link
            15 months ago

            Yeah but to the degree that they need the firmware running on each chip in the device to be a FOSS chip firmware?

          • @[email protected]
            link
            fedilink
            English
            15 months ago

            Good luck with that. What switch are you going to run? What access point what gateway for your ISP.

            • @[email protected]
              link
              fedilink
              0
              edit-2
              5 months ago

              pretty much any open source hardware can do all of those things… not sure what you’re trying to say

  • bruhduh
    link
    1
    edit-2
    4 months ago

    Intel ax210 worked good for me so far, but i don’t know if there are software blobs since everything worked from the get go without needing to install anything