Hello

I’m looking for a NAS OS, the hardware is 2bay Intel n100 machine (AOOSTAR R1), I want to run a RAID1 with few containers (syncthing, immich, jellyfin etc.) all of it to be configurable by web interface, tried some systems in a VM (hardware didn’t arrive yet), casaos has nice ‘app store’, it’s a nice docker wrapper, but it doesn’t let me manage any kind of RAID (md, brfs, etc), openmediavault is ok for raid, but the containers aren’t one click wonder like in other NAS OSes, TrueNAS SCALE seems to be an obvious choice, zfs is cool and everything but it uses kubernetes and it failed to deploy immich for example (100% CPU), i know its called SCALE but kube is a bit too complicated to me (IMO I’m 100% competent but i don’t want to tinker), and there’s… xpenology, this thing let’s me install Synology’s DSM and it’s a breeze, it deployed immich right away though i had to do it with docker-compose.yml, but in web UI. Also let’s say im in favor of xpenology… should i go bare metal or use it inside of proxmox? any pros and cons of both solutions?

  • @skittlebrauEnglish
    12•3 months ago

    The next release of TrueNAS SCALE in October is dropping Kubernetes in favour of plain Docker/Docker Compose. That may be worth a look?

    • 𝒎𝒂𝒏𝒊𝒆𝒍OPEnglish
      3•3 months ago

      Lol, nice, I’ll look in October then, also there’s a (LTT backed, TrueNAS based) HexOS in the works, zimaOS (casas based complete OS) seems to have a proper RAID support but I wasn’t able to check it out in a virtualbox

  • @just_another_personEnglish
    10•3 months ago

    Unraid or Truenas for open-ish thing.

    Synology for paid products.

    • @[email protected]English
      2•3 months ago

      I’m using truenas for my homebrew setup. I need to buy 2 more drives and start planning on rebalancing my setup, but this is how it looks right now.

  • @WilldrickEnglish
    7•3 months ago

    I dragged my feet for over 2 years after building my homelab and not putting proxmox. I highly recommend you start out with proxmox right away. It has its quirks and learning curve, but it’s been a breeze after “getting it”.

    At first I didn’t want the files inside LXC filesystems because I was used to manually poking at folders and such. But the periodic backup and restoration that gives you its the best, bar none.

    I rebuilt my setup after a faulty data cable destroyed my btrfs raid0 filesystem (I know, I knew it was dumb, but I had 8tb at my disposal and I wanted to use it dangit!). Long story short, my borg-based Nextcloud AIO backups were borked and took like 3 days of research and external drive juggling to get some of the stuff out of them. With proxmox it’s a single click to get the whole thing back up and running.

    Also you can use helper scripts as a sort of appstore, including turnkey appliances

  • @[email protected]English
    5•3 months ago

    Next truenas version replaces kubernetes with docker compose - you could try a nightly to see if that works for you

    • @[email protected]English
      2•3 months ago

      openmediavault is ok for raid, but the containers aren’t one click wonder like in other NAS OSes

      Since OMV also uses docker compose with a build in GUI to manage them, I don’t assume this would be what OP is looking for either? Unless trueNAS also comes with some repository of preconfigured compose files.

      • 𝒎𝒂𝒏𝒊𝒆𝒍OPEnglish
        2•3 months ago

        TrueNAS has some built-in kinda appstore, OMV on the other hand docker compose isn’t that straightforward, first you need to add some unofficial repo, then install docker compose, then configure it

  • @[email protected]BEnglish
    3•3 months ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    LTT Linus Tech Tips YouTube channel
    LXC Linux Containers
    NAS Network-Attached Storage
    RAID Redundant Array of Independent Disks for mass storage

    4 acronyms in this thread; the most compressed thread commented on today has 10 acronyms.

    [Thread #890 for this sub, first seen 27th Jul 2024, 05:45] [FAQ] [Full list] [Contact] [Source code]

  • @Dust0741English
    3•3 months ago

    Checkout my super recent post history. I’m doing something very very similar.

    Basically I’ve decided on Debian for OS, docker plus Portainer and dashy for interface, and mdadm for raid 1.

    I’ve tested a raid 1 failure and rebuild on two thumb drives I have, and have everything well documented. Feel free to ask any questions.

  • @[email protected]English
    2•3 months ago

    Haven’t used it myself, but similar to casa os there is also cosmos os, which looking here seems to offer some build in storage management options. Maybe this could be worth looking into?