Since I installed the official fan script, and it did nothing, I kept searching. I found a second user made script for controlling the fan, however I’m too inexperienced with linux to even understand what’s being asked.

Full page is listed at

https://gitlab.com/DarkElvenAngel/argononed

How To Install Firstly you need to have a build environment setup, that includes the following gcc dtc git bash linux-headers make git NOTE : The package names will be different depending on your OS so I’ve only given their binary names. Refer to your distribution for what you need to install. I’ve tried to make the installer as simple as possible. After cloning this repo simply run ./install You may need to reboot for full functionality.

What does he mean “build the environment setup”? And how do I clone a repo?

I’m trying this out on raspberry pi OS 64 bit, which is listed as compatible. If I can learn HOW to do this, I’ll do it on my main SD card OS, TwisterOS, which is also listed as compatible.

  • @j4k3English
    8•17 hours ago

    They are saying you need to know the distro package names on the command line. I don’t have a Rπ handy to check the packages for you. Use sudo apt-get install gcc dtc git bash linux-headers make git then see what fails. Whatever fails is likely just due to the package name being different in aptitude. The way you find the package name in Debian or any distro is a combination of searching different places and/or looking up the host repo on GitHub/GitLab/etc. Often they will list the names of the package in different distros.

    Note that, anything Debian based may be old and outdated in Aptitude packages. You can still use it just the same. It is old by design. That is what Stable distro means. If you find documentation online or you need some newer feature, you must install stuff manually. It is probably a non issue for you at this stage, but just be aware. If you see info about a ppa this is how you add the more recent packages to aptitude so that it overrides the older stable packages.

    • @Lost_My_MindOP
      2•6 hours ago

      Ok, I did this in terminal.

      bighat@raspberrypi:~ $ sudo apt-get install gcc dtc git bash linux-headers
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'raspberrypi-kernel-headers' instead of 'linux-headers'
E: Unable to locate package dtc
bighat@raspberrypi:~ $

      and then searched “raspberry pi os dtc package” and got this page

      https://snapcraft.io/install/device-tree-compiler/raspbian

      Is this what I want?

      • @j4k3English
        1•6 hours ago

        Sounds right. The thing to do is try it and see. Most Linux packages like this are tiny. Just get in the habit of installing, trying, uninstalling what doesn’t work. Take on a more scientific mindset. The Doz attempts to make a person act helpless like a dependent toddler that needs their hand held and to pay for the right to hold that hand. This is manipulative nonsense. Linux has thousands of people learning and solving problems in hundreds of ways. Just find some people doing it in a way that works for you too. Any issue likely has dozens of paths to a solution from different angles. Learn to keep looking for stuff even after you find one thing. Just be open to new stuff. Also be weary of older user based solutions that are not kept up to date. These often do not work.

  • @RegalPotooEnglish
    3•16 hours ago

    have a build environment [set up]

    Means that you need to have a C/C++ compiler and typical set of supporting tools installed so you can compile the program. For Debian (which Raspberry Pi OS is based on), the build-essential package will get you most of the way there - you can use the search tools at https://www.debian.org/distrib/packages to find which packages provide the other tools you need

    clone the repo

    Means download the code using the git tool - run git clone <url>

  • @[email protected]
    3•16 hours ago

    You need to have all those packages installed in order to build the software. If your on the default pi OS, apt install them.

    Then you just run ./install to build it.

    If you have further issues, post the log errors.

  • @Im_old
    3•16 hours ago

    Firstly you need to have a build environment setup, that includes the following gcc dtc git bash linux-headers make git

    You need to install those packages first. I’ve never used TwisterOS but looks like it’s related to Debian, so I guess you install stuff with

    apt get stuff

    To clone the repo click on the button “copy https clone url” at the top. Then on your system (where you want to clone it) type

    git clone paste the copied url