Hello all, Any advice on this would be appreciated.
My brother’s build gets the BSOD “Critical Process Died” at random times.
Fresh OS Install I have installed all drivers from MSI B650 -S except for integrated graphics as I have disabled them.
I have stress tested the CPU and GPU and all was good. I run a short ram test and all was good. chkdsk found errors and fixed them. (faulty drive?)
SFC always reports corrupted files even after clean install. (Downloaded new ISO, checked hash)
DISM reports Error: 0x800f081f
I removed the expo profile but the issue persists. Could this be a detached connector? (I do not have physical access to the device.)
Components:
AMD Ryzen 5 7600X
Western Digital SN770
G.Skill Trident Z5 Neo 32GB DDR5
MSI Pro B650-S WIFI Be Quiet Pure Power 12 M 850W
4070 Super Gigabyte
Known issue with the wd sn770/sn580.
https://community.wd.com/t/windows-24h2-wd-blue-screens/297867
Not sure if the fix will help. but it’s a start. I ultimately replaced mine with an sk hynix p41 m2. No issues since.
Thank you so much, I will update the firmware later and revert. :)
