I enabled the ipv6 address for lemmy.world. Should work now.

Next step would be enable dnssec, have to figure out how that worked again.

  • Speckle
    link
    4711 months ago

    I don’t know what this means but thanks!

    • @[email protected]
      link
      fedilink
      41
      edit-2
      11 months ago

      IPv4 is the old standard of Internet Protocol addresses that you’re probably familiar with (something like 192.168.1.10, although the 192.168.x.x range is actually only private addresses). It’s still used on most devices today but it only supports up to ~4.3 billion addresses and as you can imagine, those addresses have basically run out with all of the various devices and servers and whatever else is connected to the internet. IPv4 is in the process of being replaced by the new (10 27* year old) IPv6, but there are still a lot of old devices and a need to support the old protocol. Making IPv6 available for this server will mean any devices connected to the internet should be able to communicate with the server on this new protocol.

      As for DNSSEC, when you go to resolve a a hostname, like lemmy.world, your computer will make a request to a DNS server to figure out what IP address it needs to navigate to in order to access the server. In theory, someone could intercept your DNS request and tell you an address for the server that isn’t actually the address for the server, but rather a malicious host. DNSSEC basically acts as a layer of security to help confirm that information you’re getting on your DNS request is good and true.

      • ZippyWonderdust
        link
        fedilink
        2211 months ago

        Excellent description, but one point of note; IPv6 has been around for 27 years now, has been a fully functional draft standard for 24 years, and a full-on Internet Standard since 2017. The switch to it and away from IPv4 is long overdue.

        • Bappity
          link
          211 months ago

          I just need a technique for remembering ipv6 addresses, they’re great but I miss being able to easily memorise ipv4 D:

          • ZippyWonderdust
            link
            fedilink
            311 months ago

            I miss that too, but sadly there is no easy equivalent. You just have to make local DNS your friend. I’m in the process of going ipv6-only on my home LAN (because I’m a tech nerd). I enable avahi/bonjour on everything that supports it, then I simply connect to <hostname>.local.

            Any servers that require a static v6 IP address get something like <prefix>::BABE:CAFE:1 mostly just as a way to remind myself that the address is static and not allocated by SLAAC.

      • Speckle
        link
        911 months ago

        Thanks, that’s really nicely explained. I was being a bit silly but got to learn something!

    • @dhork
      link
      16
      edit-2
      11 months ago

      IPV4 are the standard 192.168.0.1 ip addresses you may be used to. That numbering scheme supports over 4 billion addresses, which is not enough.

      IPV6 uses longer addresses, like 2001:0db8:85a3:0000:0000:8a2e:0370:7334 . Which is not nearly as convenient, but allows for 340 trillion trillion trillion addresses, which might be enough, possibly.

    • Czele
      link
      311 months ago

      Yea im also curious. Probably a good change for some users with specific use case

  • @roddy
    link
    3011 months ago

    The website just became 10x better. It loads much faster for me now because my connection doesn’t need to go through layers of CGNAT, it just directly connects through IPv6. Thank you so much.

    • JelloeaterA
      link
      411 months ago

      Ouch, CGNat sucks for sure. Glad IPv6 cuts through the mess!

  • Shindig
    link
    2211 months ago

    DNSSEC is simple. I just did it for a domain on cloudflare. Enable it in your DNS interface (cloudflare in my case), and then copy paste a few things to your domain registrar.

    • RuudOPMA
      link
      2911 months ago

      Ah yes I think I did it, i’ll test now

  • 2xsaiko
    link
    fedilink
    English
    1711 months ago

    Always great to see more IPv6 support!

  • @odseey
    link
    English
    1611 months ago

    nice

    $ resolvectl query lemmy.world
    lemmy.world: 135.181.143.230                   -- link: enp4s0
                 2a01:4f9:3a:178f::2               -- link: enp4s0
    
    • @V4uban
      link
      411 months ago

      The improvements are crazy

  • Sponholz
    link
    1511 months ago

    In this fediverse world, this specific world is getting better and better!!!

    Awesome work!!!

    Lot’s of awesome news recently, Lemmy apps rising, Thunder app looks promising, Jerboa got a ton of contributors, breath of fresh air indeed.

  • Disney Fan
    link
    1111 months ago

    Thanks for maintaining the best instance lol

  • @kn33
    link
    1111 months ago

    Good shit

  • @apearson
    link
    511 months ago

    Thank you for enabling IPv6!

    • RuudOPMA
      link
      411 months ago

      You’re welcome!

  • @[email protected]
    link
    fedilink
    311 months ago

    Can I write it’s ipv6 address in browser’s address bar and it will take me to lemmy.world?

    • RuudOPMA
      link
      611 months ago

      You’re welcome!

    • RuudOPMA
      link
      211 months ago

      Nice!