You must log in or register to comment.
I think it’s insane the rules for anything computer-related or computer-adjacent
“Oh if you make anything using our software, legally it’s ours.”
Could you imagine if the same logic applied if you removed the “Magic Technology is Magic” aspect?
“Oh you built this house with one of our hammers, so it’s ours actually.”
Just got a framework laptop and I’m really happy
I’m glad. I hate the fact that TV’s are so cheap now that fixing them literally isn’t worth it. Same with a lot of laptops and tablets and stuff. I’d much rather have a chunkier phone than one I won’t ever be able to fix.
I think that the worst part is the ones that make repairable tech are so much smaller than you are paying top end prices for rather middle of the road performance. This is not true of them all of course but it is hard to look at the fairphone 5 and think it is worth it over a cheap secondhand/refurbished flagship from the previous generation.
In the last few years I’ve fixed about a dozen TVs, they can definitely suck to fix at times (especially the really new ones) but in general the fixes have been simple. And all of them were snagged out of the dumpster at my apartment complex.
And that’s just the TVs I’ve fixed. I like to fix things.
In terms of phones they’re a nightmare though. I’m keeping an eye on HMD phones and Fairphone though as both of them are a LOT easier to fix than other brands.
In the event of my current phone breaking I’d love to get either one of those brands.
Reminds me that I have to fix mine. Just shows the LG logo and does nothing
Probably not much more I can do besides replace caps
NGL when it comes to that kind of fault I usually just replace the mainboard, they’re usually dirt cheap and it’s a hell of a lot easier to swap that whole board than it is to poke and prod for an hour just to find out it’s some 40 pin monster with micro-soldiered pins.
The power board is usually what I do component level replacements on. The t-con board and the main board I usually just swap.
What’s the typical fixable issue you are finding?
For TVs it’s usually really simple, like internal fuses or blown caps. And a few with bad backlights or mainboards that are dead.
For 2 of them it’s been shorts in the LCD itself which meant I had to block the clock pin from the TCON board for the specific part of the screen with the short. Basically killing a line of pixels to get the TV working again. In general if the TV is 4k and smaller than like 45 inches you’ll never see it unless you look for it.
That’s a super involved fix (involving A LOT of trial and error to find the right pin) but it keeps it out of a landfill.
In general fixing a TV is always cost effective unless the actual LCD has physical damage.
hey, I’m getting into this kind of repair. I have good soldering skills and am great at taking things apart, but do you have any tips on how to find the fault? even it’s just a blow capacitor, what am I looking for?
NGL I usually only do component level repairs on the power boards (or in the case of appliances most of the components are easy to find docs for and are much larger) but I usually find stuff by poking around with my multimeter or looking for obviously blown things. But my experience is more from the realm of appliance repair (and all from experimenting).
Testing capacitors can be done (and if they’re big enough) something I’ll do as well. I ain’t gonna test capacitors that are smaller that a grain of rice.
There are times though that it’s easier to just buy a new board rather than do component level repair.
Good news is that when it comes to TVs those boards are usually really cheap.
Any tips on finding someone who does component level repair? I have an old-ish laptop (7 years?) and the only issue is the USB C charger seems to be losing connection. If I flip the charger it works fine, so I think the solder just needs to be reflowed.
I think it would take an experienced person <30 min to fix. It’s almost not worth it though since it’s so old, but I’d be willing to pay $50-100 if it makes charging work better.
Usually if it’s a charging port, it’s pretty common that there’s like dirt in there or something.
But soldering a type C connector is pretty tough due to the size. Especially for my (lack of) experience level.
It could be a learning opportunity for you though.
Probably bad caps in the power circuit
This is one of the handful of things me (a leftist) and my rural Trump supporting family both heavily agree upon. It’s nice to find some common ground in such a divided America.
I think we got lucky on it that John Deere and Car companies have been trying to ruin repairability long before it was cool.
And “right to repair” is a nice simple slogan, even the most rural person in America can hear that and will probably go “Fuck yeah I should have the right to repair my car!”
Local & state level is where a lot of the progress will live on in the near future. Call your local legislators & vote in every local election - they are way more frequent across the country than you may realize
