It’s always particularly nice and soft the first time you put it on, but the one I got most recently is so bad it leaves a thin but thorough coat of black fur on my arms when I take it off. What’s the production methods used when making sweaters like this?

  • Carighan Maconar
    link
    211 year ago

    This mostly happens because they’re probably both cotton.

    As you wash them, the oils the fabric was soaked in for protection slowly get removed, and the cotton fibres are rather crinkly. They can grab onto loose and weakened other fibres. This is also why some of them “ball” on the outside (no clue what it’s called in English). Now on the inside, it’s the shirt pulling loose fibres off the inside of the weapons, the tiniest break-offs.

    To alleviate this - you can’t entirely fix it, other than wearing different combinations of materials instead of cotton on cotton - wash your sweaters inside-out, which you should do anyways, in particular on printed sweaters. Instead of the insides of the sweater rubbing together and depositing lots of loose broken fibres for the t-shirts to pull off, those will get pulled off inside the washing mashine.
    Note: This increases the speed at which you get the “balling” (since now the outside rubs against itself), but on fibres that can do this you want to eventually use a fabric shaver every so often anyways if you don’t already.

      • @[email protected]
        link
        fedilink
        121 year ago

        You corrected this but didn’t tell them it’s ‘arms’ not ‘weapons’ in this context? :)

        • NaN
          link
          fedilink
          English
          31 year ago

          These guns are registered, Mr Smith and Mr Wesson.

          • @[email protected]
            link
            fedilink
            21 year ago

            I just thought they were someone too paranoid to put their twin pistols down when taking their sweater off. That’s bound to create more wear and tear hence their detailed sweater maintenance knowledge.

    • @Tuss
      link
      51 year ago

      I think he OP is specifically talking about a certaing kind of sweatshirt that, instead of being woven on the inside, has loose threads. It’s not even like a Teddy-fabric. The fabric is just non-woven and sheds microfibers like crazy the first few uses. But after a few washes that soft cushy inside is knotted and uncomfortable.

      • Carighan Maconar
        link
        21 year ago

        Haha, yes in this case it is. It’s rather a typo from “Caraighan Maconar”, an Aes Sedai of the green Ajah from the Wheel of Time novels. Been using that forever, never realized how close it is to “cardigan”, usually people think it’s “Kerrigan” from Starcraft. 😄

    • @200ok
      link
      21 year ago

      The “balling” is called pilling

  • @Link69
    link
    161 year ago

    I believe this mostly happen with low quality clothing, they use shorter staple that deteriorate faster, aren’t as soft, and doesn’t feel as high quality. Brands mitigates this feeling by using chemical softeners that will fade with washing cycles and you’ll get what happens now.

    Source: I’m really into clothing and used to buy cheap stuff because of cool prints or hype brands, now my high end cotton clothes don’t have those issues

    • Sweetroll
      link
      English
      61 year ago

      Do you have any recommendations for high quality clothing?

      • @Link69
        link
        81 year ago

        There’s a lot but some of my favourites are Document (Korean brand), Arpenteur (amazing brand from my city), A Kind of Guise (German brand), Borali (very small label, the blog is very worth it if you can read French/use a translator), Orslow, ADER error (although some pieces have a bit too much plastic but the ones I own are very sturdy, also a bit overpriced), Maison Kitsune (same but I’m too much into foxes to skip this one lol), Matsuda (Japanese eyewear, handmade with awesome details and materials), …

        • @[email protected]OP
          link
          fedilink
          2
          edit-2
          1 year ago

          Nobody seems to “just make high quality clothes” anymore. It’s always partly “we do clothing properly” but also “this is a modern art project, and also sometimes we don’t do clothing properly”.

          The modern art vibes have always, frankly, disgusted me.

          I’d much rather buy from a factory with a known location and a known manufacturing/tailoring process, with a sales tactic based purely on describing methodology and materials.