Hey yall, I want to get into self-hosting. I want to start from hosting on a raspberry pi, and I am just wondering if yall have any recommendations (I’ve never hosted anything before, but have experience in linux and programming). Sorry if it’s bit of a stupid question.

  • @cyanide
    link
    English
    202 years ago

    Pihole is easy and light enough. I used to host Transmission (transmission-daemon) on a 3B+ and it worked alright for seeding around 300-500 torrents. FreshRSS also worked alongside.

    • Sens
      link
      fedilink
      English
      12 years ago

      Pihole my is choice too. It’s pretty good, but for some reason video ads still get through even off YouTube? Is it possible to block them?

      • @cyanide
        link
        English
        122 years ago

        uBlock Origin gets rid of every single one.

        • Spy
          link
          fedilink
          22 years ago

          You are not wrong, but uBlock needs to be installed on each device and only works on the browser, while pihole blocks adds across the whole network for all devices.

          I have pihole but still use ublock on my personal computer

          • @cyanide
            link
            32 years ago

            I did recommend Pihole in my original reply. But there’s no way to block Youtube ads using it, as was being asked in the reply to my original reply.

            • Spy
              link
              fedilink
              22 years ago

              Ah my bad mate, I didn’t notice you were the same person and the way you wrote your reply made me think you misunderstood the advantages of each and we’re recommending to use ublock only

          • generalEdo
            link
            fedilink
            12 years ago

            I have started installing it when setting up new workstations at work.

      • Mogster
        link
        fedilink
        82 years ago

        You can’t do that with Pihole as the ads come from the same domains, and basically need a browser extension or an app with a built in equivalent.

        If you’re in the UK though, it does block the ads on All4 which was a nice surprise. It even works for the TV app.

        • Sens
          link
          fedilink
          12 years ago

          I am in the UK and that’s really useful to know. Thanks

        • @Fudgeknuckles98
          link
          12 years ago

          Also blocks all the ads on itvx which was another pleasant surprise

      • @[email protected]
        link
        fedilink
        English
        52 years ago

        YouTube ads don’t come from a separate server. They come in the same way as the video. They pretty much need to be filtered out at the player end (e.g. browser plugins).

      • phi1997
        link
        fedilink
        42 years ago

        Pihole blocks ad domains. YouTube ads are still from youtube.com, so you have to block them on the browser level with something like Ublock Origin

      • Zagorath
        link
        fedilink
        English
        2
        edit-2
        2 years ago

        You can block ads on your computer with basically any browser plugin adblocker.

        If your phone is Android, using an app called ReVanced, which is a modified version of the official YouTube app that essentially gives you all the Premium features (including adblocking and picture-in-picture) for free. You can even sign in with your Google account and interact with playlists, comments, etc.

        It has to be side-loaded, of course, since Google wouldn’t allow that in the Play Store.

      • R315U8_
        link
        fedilink
        12 years ago

        Use firefox with uBlock Origin to get rid of YouTube ads.

  • Krafting
    link
    English
    172 years ago

    Pihole is the best starting point in my opinion, helped a lot of my friend to get started !

    • DunkinCoder
      link
      English
      3
      edit-2
      2 years ago

      Goes against the spirit of self-hosting but for some stuff(Email, DNS, Passwords), I just SaaS it out. As much as I love my lab, nothing self-hosted in my prod environment is critical.

      • Spy
        link
        fedilink
        22 years ago

        Exactly, I can barely maintain a media server I really don’t want to be responsible for my passwords and photos. There are secure alternatives that are private and open enough for my needs…

        • DunkinCoder
          link
          12 years ago

          I haven’t found anything software-wise (self-hosted or SaaS) that I’m satisfied with for photos. Thankfully, those are easy enough to backup and aren’t used day-to-day. What have you tried, and do you like/dislike of each?

          • @PhilBro
            link
            1
            edit-2
            2 years ago

            Have you looked into Immich yet? I am really liking it and the contributors are very passionate

            • DunkinCoder
              link
              22 years ago

              Just checked and it’s one of my many Starred repos. Thanks for the vouch though, kind of gives me a “short list” to review now.

          • Spy
            link
            fedilink
            12 years ago

            At first I tried some self hosted solutions but I didn’t like anything, eventually I landed on ente.io/ which I really like.

            It has a lot of ways to import your photos, really nice mobile and pc (windows, Linux, and Mac) apps that can automatically upload your pictures in the background, the devs are really responsive (there was a bug with one of the importers so I opened a ticket and I got a lot of help in order to debug the issue and solve it).

            The only thing that I don’t love is that while the clients are all open source, the back end isn’t because they claim they are too small of a team to keep it both open source and secure.

      • @dustojnikhummer
        link
        English
        12 years ago

        You should have your own DNS, but I don’t trust selfhosting passwords and emails either

        • DunkinCoder
          link
          English
          12 years ago

          I’ll use split-DNS for some things internally, but most things just go through NextDNS lately.

      • Dr. Jenkem
        link
        fedilink
        English
        102 years ago

        You can change the DNS on your personal devices instead of changing it on the router.

      • Hovenko
        link
        fedilink
        English
        52 years ago

        You can make an HA cluster from 2 or 3 pies. One node goes down, the other takes over. Or go the docker swarm road.

      • LordChaos82
        link
        fedilink
        12 years ago

        @joshuaacasey @Krafting I have two pihole instances running at home as primary and secondary DNS servers. They are both on separate nodes and that helps to make sure the wife and kids are not without internet when I am screwing around in my homelab.

      • @[email protected]
        link
        fedilink
        English
        12 years ago

        This is why I only have personal devices running through it, the rest of the house is just normal DNS.

    • @[email protected]
      link
      fedilink
      English
      82 years ago

      I just started with HA as well and it’s a massive rabbit hole haha. So far set up thermostats for rooms, motion sensors with smart lights and integration with Frigate for my security cams. Also set up a tablet with HA which displays all our photos from the NAS as screensaver.

      • @tburkhol
        link
        English
        22 years ago

        Add outside environmental conditions from your national provider and purpleair, and you can figure whether it’s better to run HVAC or open a window. I have an aspirational project to motorize some windows.

      • @cyanide
        link
        English
        32 years ago

        Depending on what method you use, you would either have to change the configuration for port mapping in a file or when you run the container. It’s simple enough, and you should be able to figure it out quite easily. If not, help for Docker related stuff is never far away.

  • @cupricreki
    link
    English
    122 years ago

    For the cost of a rpi, just get actually capable hardware. Once you actually get anything running you’ll wish you had real hardware.

    • @achensherd
      link
      English
      42 years ago

      I’ve been leaning this way lately. From a cost/capability standpoint, RPis were easy to justify when they were ~$30, but not as much at their current inflated prices unless you have specific power consumption and form factor requirements. Used/refurbished Dell thin clients and MFF PCs can be had for $40-100, ranging from fanless systems with low-power Atoms and Celerons to full-fledged desktops with Core i-series CPUs, all with memory and storage included more often than not. I personally just picked up a Dell OptiPlex MFF with an i5-9500T, 8GB RAM, and 256GB SSD for $100.

      • @Heastes
        link
        English
        12 years ago

        Refurbished thinclients really are fantastic if you don’t specifically need a pi for the formfactor. I got a bunch of Fujitsu S920 with 4GB RAM for roughly €35 a piece and I’ve been pretty happy with them so far.

    • @pi11
      link
      English
      2
      edit-2
      2 years ago

      What kind of hardware, with a similar price point to the rpi, do you think of?

      • stankmut
        link
        English
        32 years ago

        This reminds me of the old “build a gaming pc for less than a console” thing was popular for a while.

        So let’s assume a $90 raspberry pi (someone really splurged here)

        • $90: case
        • $0: cpu, get used from a friend
        • $0: motherboard, get used from a friend
        • $0: ram, get used from a friend
        • $0: power supply, steal from work

        You can drop the case and just use a cardboard box, which would allow you to afford storage. I’m just going to assume you boot from a usb and keep everything in memory.

        • @pi11
          link
          English
          32 years ago

          What do you think about refurbished micro-pc’s? Like this Lenovo ThinkCentre M910q Tiny (i5-6500t; 8GB RAM) for 130 euro’s?

          • stankmut
            link
            English
            32 years ago

            I have a refurbished dell that I got for ~$150-$200, the cpu is an i5-8500t. I think those are great deals, would absolutely recommend them for a home server. As your needs grow, you can even replace the RAM inside later.

            • @green_dragon
              link
              English
              12 years ago

              Agreed. I picked up the M910q for $100 including shipping from a corporate sell out on Ebay. It does everything I need; and has the ability to do so much more.

  • @umbrella_dev
    link
    English
    112 years ago

    One suggestion might be to load a Debian build on it and use it for docker containers. With docker containers you can do so many different things. I have a PI 4 and it does all of the following:
    PiHole - For blocking ads. (Everyone should have one of these)
    OpenMediaVault - For NAS
    Portainers - For loading docker containers
    Radarr - Downloading Movies
    Sonarr - Downloading TV Shows
    Tautulli - Monitors my plex server
    Overseer - Allows members of my plex share to request content.
    NZBGET and Real-Debrid Torrent Downloader Clients - For downloading content from usenet or real-debrid.

    I have one Pi4 running all of these as docker containers. Have fun!

    • EmptyRadar
      link
      fedilink
      42 years ago

      Seconding - you can actually squeeze a surprising amount of use out of a Pi4 running Docker.

      • @Bourff
        link
        12 years ago

        I have an 8gb one with ELK stack in docker compose, and it’s struggling to say the least, even without traffic.

    • @darts
      link
      English
      12 years ago

      Any chance you can point to a good tutorial for setting up these apps on the RPi?

      • @umbrella_dev
        link
        English
        22 years ago

        Let me start by saying I hope you enjoy this stuff. Some of these can be a bit much to setup. I personally love this stuff so for me although it can be challenging it’s fun.

        I started out by installing OMV 6 - Open Media Vault. https://www.addictedtotech.net/how-to-install-openmediavault-6-on-a-raspberry-pi-4/

        That’s your starting point. From there you can install “Portainer” from the OMV extras. Portainer is where you will put all your docker containers.

        Here’s another script you can use to install several of these if you want to do it without OMV or docker.

        https://github.com/pijarr/pijarr

        • @darts
          link
          English
          12 years ago

          Amazing, thanks so much for sharing this additional info!

  • nicman24
    link
    fedilink
    102 years ago

    honestly it is good to start with and for controlling machines like an array of 3d printers but a dumpster dive laptop will be faster. RPI4 is quite old now.

    with that done:

    • jellyfin
    • smb server
    • syncthing
    • tftp with wake on lan / clonezilla to backup your other machines
    • @Fudgeknuckles98
      link
      32 years ago

      I think you’re underselling the RPi a little there. I have an 3B+ which is running a few services well and it’s being undervolted so I could squeeze some more performance out of it with a better power supply. My Pi is currently running:

      -Pi-Hole -FreshRSS -WireGuard -Gluetun -Libreddit -Deluge

    • SpaceCadet2000
      link
      fedilink
      12 years ago

      jellyfin

      How good is the performance of that on a rpi4? Does it work for transcoding videos?

      • spite
        link
        fedilink
        52 years ago

        It doesn’t. Not well. And for larger files, even on cable connection without transcoding performance is god awful, sometimes it doesn’t play, or stutters or you get awful audio desyncs. Don’t do jellyfin on rpi

        • @[email protected]
          link
          fedilink
          22 years ago

          Are you talking about 4k files? Because I have been running Jellyfin on my pi400 for the past two years and I’ve not had those issues at all. My content is 1080p max though.

          • @betoissues
            link
            12 years ago

            Have you checked if those files are being transcoded? This will depend on the clients used and the codecs supported. I use mine mainly to stream anime at 1080p, the files I get from my current source don’t trigger the transcoding (Direct Play); while some older files I had used unsupported codecs and required the transcoding.

          • spite
            link
            fedilink
            12 years ago

            Yep, 4k, sometimes with HDR. It was happening mostly on those. But 1080p files were also sometimes affected

            • DevilBoom
              link
              fedilink
              02 years ago

              I ran JF for about a year on a Pi 2B. Transcoding off at the server. No issues at all playing any file using Direct Play - including large 4K rips. I moved to an Odroid C2, again, absolutely no issues with playback.

              If you’re seeing trouble with Direct Play I’d bank on it being network or storage related rather than the power of the Pi. E.g. the network hasn’t got enough throughput to serve the files. In Direct Play you need very little in terms of server resources as it’s handed off to the client.

              • spite
                link
                fedilink
                22 years ago

                Dunno, maybe it was storage. I had a SATA to USB3 drive hooked up to it. Couldn’t have been network. I got some old office PC with i3-6100 for free, hooked it up to the same cable, same router port and everything is working mostly smooth now, on similar drive but connected directly to SATA

        • whoareu
          link
          fedilink
          12 years ago

          it ever performs awfully slow on my secondary computer with i3 cpu.

  • thehatfox
    link
    fedilink
    82 years ago

    PiVPN is a simple home VPN solution that’s worth exploring.

    Is you are interested in smart home/home automation Home Assistant is an open source home automation platform and makes a great Pi project.

    • spite
      link
      fedilink
      12 years ago

      I’ve recently set up pivpn with duckdns. Are there any security related steps I should take or is the out of the box config good enough?

  • @[email protected]
    link
    fedilink
    English
    72 years ago

    Pi Hole is a good start. If you’re into movies and TV shows, sonarr /radarr/bazarr is an option

    Would highly recommend to use docker images from https://www.linuxserver.io Except pi hole, I’ve dockerized everything. So much easier than installing stuff as every application does that differently.

  • zooterthepenguin
    link
    fedilink
    52 years ago

    If you have a 3d printer also check out Klipper, Octopi etc. I run mine off a pi zero 2 and it is a leap in performance over the stock board on the Ender 5.

    • EmptyRadar
      link
      fedilink
      12 years ago

      Yeah OctoPi is a game changer. Take it one level higher if you have several 3D printers and run OctoFarm. Now I just click a button and my multi-piece print is distributed to my print wall.

  • Martinligabue
    link
    fedilink
    42 years ago

    Some things that haven’t been proposed here might be to use it as a nas. If you want to access your films and shows from outside it’s easier to set up Plex instead of jellyfin for now. You can use it also as a steam machine streaming from the pc to the tv, or as Kodi/Libreelec mediacenter to make your tv smart

    • Zagorath
      link
      fedilink
      English
      02 years ago

      use it as a nas

      If you do this, whatever you do make sure at the very least you get NAS-grade hard drives. But preferably, use some sort of RAID system as well.

      I just lost years worth of data because I used a consumer external HDD as my NAS drive connected to my RPi, and I’m not sure yet if I’ll be able to get it back.

      • @ChubbyHot
        link
        English
        12 years ago

        for starting out any existing hard drive is enough though

      • @betoissues
        link
        English
        12 years ago

        Even with enterprise grade and RAID set up, some sort of backup would help.

        Restic with backblaze is easy enough to set. I personally use this and an encrypted external HDD.

  • @wheelcountry
    link
    English
    42 years ago

    Pihole is a good start, though I personally use my Pi 3B+ for printer server over WiFi since I have a dumb Epson printer.

  • Daniele
    link
    fedilink
    English
    42 years ago

    I have two Raspberry Pi (4 / 2) and I use them to selfhost:

    • AdguardHome (two instances)
    • HomeAssistant
    • NextCloud
    • Forgejo
    • VaultWarden
    • NTP server

    Those are all as Docker services so I can easily switch to new devices in case I need to. All of them work like a charm.

  • @[email protected]
    link
    fedilink
    English
    42 years ago

    My list for my raspberry pi 4 (4 GB):

    • Nextcloud (synced cloud storage, like Dropbox; it can do more with plugins but this is all I use it for)
    • FreshRSS (RSS reader)
    • Wallabag (read it later, like Pocket or Instapaper)
    • Gitea (git project hosting like Github; admittedly I don’t really use this one much)
  • @[email protected]
    link
    fedilink
    English
    22 years ago

    If it’s a Pi3b+ - you can actually host a vanilla Minecraft server on it, with some heavy optimization to reduce memory usage and no more than 4 players online. It’s a fun experiment, however impractical.