• rants_unnecessarily@piefed.social
    link
    fedilink
    English
    arrow-up
    8
    ·
    7 days ago

    A few years back I threw my stash into the metal recycling, leaving me one or two of each side. Immediately after that I needed one that I knew I had the size for, but couldn’t find it anymore.

    Never throwing them away again.

  • ToiletFlushShowerScream@piefed.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    7 days ago

    I get that they are poor quality and soft metal, but recycling them in my area is not possible, and my brain stops me from putting it in a landfill. So junk drawer it goes!

  • gaiussabinus
    link
    fedilink
    English
    arrow-up
    9
    ·
    7 days ago

    I work in the trades. If you throw out the roof hatch Allen key, I will fight you.

  • Screamium
    link
    fedilink
    English
    arrow-up
    6
    ·
    6 days ago

    Tape it to the bottom of whatever furniture or whatever you just put together!

    • 123@programming.dev
      link
      fedilink
      English
      arrow-up
      1
      ·
      5 days ago
      1. Can’t find it when disassembling
      2. Buy another copy
      3. Find it once furniture is flipped
      4. Have 2x of the same tool
    • negativenull@piefed.worldOPM
      link
      fedilink
      English
      arrow-up
      6
      ·
      7 days ago

      I bought a set of Standard/Metric ones that are like 6 inches long. That extra length makes such a difference. I threw my stockpile away after that.

      • goondaba
        link
        fedilink
        English
        arrow-up
        5
        ·
        7 days ago

        That was my plan; got a set and figured I’d throw out the pile eventually.

        But when I tried using only my set keys, it turned out some of my gear has specialty sizes I can’t open/tighten with my set keys.

        So now I’m MORE paranoid about hoarding all the Allen keys.

        • binarytobis
          link
          fedilink
          English
          arrow-up
          2
          ·
          7 days ago

          Did you get both an imperial and metric set? I see a lot of each.

          • goondaba
            link
            fedilink
            English
            arrow-up
            1
            ·
            6 days ago

            Yep; got an SAE/Metric set, but apparently I have some gear that uses really tiny or comically large key sizes.

      • N0t_5ure
        link
        fedilink
        English
        arrow-up
        5
        ·
        7 days ago

        The free ones they give you are made from the cheapest metal and to poor tolerances. They’re literally the bare minimum to put together whatever they came from. They’ll potentially slip and round off if used heavily. Good quality ones are made from carbon steel and will hold their shape.

  • P1k1e
    link
    fedilink
    English
    arrow-up
    2
    ·
    7 days ago

    Thank you random meme on the internet. I have now cast them into the fire