When you “cast” from the phone to the Chromecast, what happens it that the phone gives the Chromecast an URL where it can find the stream to play. The phone can read that stream because it’s connected to the Tailscale VPN. The Chromecast isn’t, so the stream URL is inaccessible to it. You see the Jellyfin logo because that’s a feature of casting (the app on the phone gives the Chromecast a logo to show).

There’s no point in announcing the subnet from your laptop, because your laptop is not a router for the local LAN. You can use this to reach local LAN devices from remote Tailscale nodes but not the other way around.

Some possible solutions:

1. You enable the hotspot feature on the phone while connected to Tailscale, and connect the Chromecast to the wifi of the phone. But the stream will consume the cellular connection, because you’re using the phone’s wifi for the hotspot (the phone only has one wifi interface so it cannot use it both to connect to the local LAN and for hotspot).
2. If you connect the local laptop to the router with a wired connection you can use its wifi as hotspot, connect the laptop to Tailscale, connect the Chromecast to the laptop hotspot, and the stream will arrive over the local connection.
3. You can try to install Tailscale on the router, if it runs OpenWRT or something similar, and if it has enough storage space (the Tailscale packages are kinda large). If you announce the subnet from the router then it will work as intended and all the devices on the local LAN will be able to “see” the remote laptop.
4. If you’re using nginx as reverse proxy with TLS certificates for the remote Jellyfin you can try this: expose it to the internet without Tailscale and use nginx-ip-whitelister to temporarily allow access from your local LAN’s public IP. All devices in the local LAN will see the remote Jellyfin. But read the warnings on the project page, it’s not as secure as a VPN. And of course “expose jellyfin to the internet” is not as simple as it sounds (you need a domain, you need to get Let’s Encrypt certs, a public IP, a port forward etc.)

Casting is always weird with networking like that. I’d highly recommend trying to find a way to run jellyfin locally cause nothing will really make Tailscale play nice with casting in my experience.

I resorted to buy a new one with android tv, so now I just have tailscale installed in it and can directly play jellyfin.

The issue is the chromecast can’t resolve back to the tailnet with subrouting. Probably connecting the chromecast to a network which resolves the connections for it could work, but I don’t know how to do that or if it’s actually possible.

If your router lets you try adding a static route for the tailscale IP/subnet to the laptop with IP forwarding enabled.

Subnet forwarding does not work in that direction. What you’ve done is allow devices in your Tailnet (i.e. your remote machine) to access 192.168.1.0/24 by using your laptop as a proxy, not the other way around; the chromecast doesn’t know it could reach your remote machine via your laptop.

This would be a giant hack and it’s unlikely to work but it’s possible you could get the Chromecast to communicate with the remote machine via your laptop by setting the default gateway of the Chromecast’s network connection to the local IP address of the laptop.
It’ll probably lose internet connection that way, not sure Jellyfin needs that (don’t think so?).

I’d rather recommend you look into getting Tailscale onto that Chromecast. I’ve never used these things, so I don’t know whether that’s possible.

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

4 acronyms in this thread; the most compressed thread commented on today has 7 acronyms.

[Thread #299 for this sub, first seen 25th Nov 2023, 18:25] [FAQ] [Full list] [Contact] [Source code]

deleted by creator