Hi everyone!
I’m curious to know which slicer you guys use.
I’ve been using the Creality slicer, but it seems like it pretty consistently crashes, and I’ve tried Cura but the print seemed stringy despite using the same settings.
How are Orca or Prusa?
PrusaSlicer. I like the settings better. It’s a good slicer.
I had some issues early on with Cura and switched to Prusa, and it’s always worked well for me.
deleted by creator
There’s also a community built Flatpak if you’re ok with that
deleted by creator
There’s also Orca and SuperSlicer which are forks of the same code as Prusa.
I use the Flatpak version.
What is an appimage?
Basically an executable package of an entire application for Linux. It doesn’t integrate with package managers meaning you’ll have to update it manually.
deleted by creator
deleted by creator
Orcaslicer
Preach, best of all worlds
Another vote for prusa here. The recently added organic supports are really awesome. It’s enabled me to print some things I previously would not have attempted.
Prusa slicer, partially because I have a mk3s+ but also because I tried to use cura many times but always several minutes into using it, my entire laptop just shuts off, like the power was pulled, no logs written to disk, no error message. It’s the only program to do that and I can’t even report an issue because there’s no logs I can submit. I assume it’s related to taxing my GPU in a way that causes a power related fault.
I used Cura for a few years, then I tried Prusa and my print quality dramatically improved for reasons I have not figured out.
Haha this is exactly my experience. Pusaslicer/superslicer just make such better prints for me and I have no idea why. Despite putting so much effort into my Cura settings, Prusa just prints better out of the box with so little effort.
SLA: Lychee free version bc fuck renting licenses
FDM: prusa slicer bc open source ftw
Cura, I’ve gone back to Prusa periodically but it has too many features hidden behind simple buttons or percentage sliders for me.
I used Cura about 5 years ago and my experience then was actually the inverse, especially in regards to slicing settings. There were tons of settings buried all over the GUI and you really had to dig for them.
I used KISSSlicer for a while and got into PrusaSlicer. They all seem to have their struggles from time to time. Maybe I’ll try out Cura again the next time I run into a wall.
By default all the settings are hidden, it’s annoying, but you can show all of them in the settings and then it has a bunch more that I can find equivalents to in Prusa.
Another OrcaSlicer user here. Started off with PrusaSlicer and switched over at a friend’s recommendation, and honestly am so glad I did (it has a much nicer UI and some really neat features ported over from SuperSlicer).
Prusa and SuperSlicer.
SuperSlicer, nightly builds from GitHub.
Nightly builds with commits that happen sporadically every few months it seems 😭.
That said, it looks like some action happened since my last build. I’ll have to see if the cone slicing thing is fixed…
I’ve almost always used PrusaSlicer just because the only printers I had access to were mk3s+.
I’ve started playing with Cura though because A. i wanted some more complex prints that PrusaSlicer struggled to support, and B. We also got some creality cr-30’s functional at my college again. So far I still feel Prusa is easier but that’s likely just familiarity.
Cura and my self programmed vase mode slicer
Prusaslicer
Cura. Works for me.
Cura has always been my go-to because we used it back in my high school drafting class and I haven’t tried anything else since then…
