Better make WiFi routers hubs between every 20ft and interconnect them as mesh network this way your setup will be many times more robust, speaking from experience, on the job we have internet cables drawn inside walls so they aren’t accessible and some cables can lose some signal strength after a few years of usage, these hubs are mainly for strengthening signal at key points, but also if at some point signal is lost then WiFi bridges can act as temporary solution until you find where is that cable in chain of cables and replace it
some cables can lose some signal strength after a few years of usage
Roughly how many years are you thinking about? I’ve been using the same 10m ethernet cable for more than 20 years. And my expectation was that only physical wear would damage it (eg. rolling and unrolling it to deploy in a different place; possibly closing a door on it accidentally… that kind of thing).
Better make WiFi routers hubs between every 20ft and interconnect them as mesh network this way your setup will be many times more robust, speaking from experience, on the job we have internet cables drawn inside walls so they aren’t accessible and some cables can lose some signal strength after a few years of usage, these hubs are mainly for strengthening signal at key points, but also if at some point signal is lost then WiFi bridges can act as temporary solution until you find where is that cable in chain of cables and replace it
Sir this is the shitpost community not the shittysysadmin community.
On anothernote: take my upvote :D
Thanks)
Roughly how many years are you thinking about? I’ve been using the same 10m ethernet cable for more than 20 years. And my expectation was that only physical wear would damage it (eg. rolling and unrolling it to deploy in a different place; possibly closing a door on it accidentally… that kind of thing).
Same, but cable detoriated despite being untouched inside walls
Or just, get good cables.
OP is likely running it through hallways.