Right now it’s just flicking on and off at an infuriating interval. I assume it’s supposed to sense motion but there’s no real motion happening. Maybe it’s just broken but I’m hoping I just don’t know how to use it and one of you does.

When I press the side buttons those green lights seem to go up or down. None of the other buttons appear to do anything.

Update: idk how it didn’t occur to me to just cover it but that’s night 3/3 12s for ya.

  • TrackenDaKracken
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 hour ago

    It’s not worth worrying about or fussing over. Replacing a switch is an easy task, all you need is a screwdriver. Then you’ll have what you want, it will work, and you can toss this thing. Go buy a switch you like, watch a video or two on how to do it, TURN OFF THE BREAKER, and replace the switch. It will take all of 10 minutes if you go slow.

    • Apytele@sh.itjust.worksOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      57 minutes ago

      Don’t have access to any of that and opening it at this time would be… unsafe. Work order is already in but they won’t be here until tomorrow and that doesn’t help the person trying to sleep near it.

      • Fermion@feddit.nl
        link
        fedilink
        English
        arrow-up
        3
        ·
        53 minutes ago

        Have you tried covering it up with something for the time being so it can’t detect any movement?

        Otherwise I would check to see if any other switches cut power to that circuit. It would be unusual to not have any way of switching a light off completely.

      • IMALlama
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        2
        ·
        44 minutes ago

        unsafe

        I’m in the Us and while I would not call 110 VAC safe it’s very unlikely to do any kind of lasting harm. Don’t grab the both sides of the circuit with opposite hands, have dry hands, don’t wearing metal, etc and you’ll be fine. If you’re able to get the screws off you’ll only need to remove the neutral wire. This wire should not be carrying any voltage.