This is an abrasive disk, rotating at 1500 rpm. When I shine my flashlight at it, it carries the glow with it, approximately halfway around the disk. What am I seeing happen here?

  • Brokkr
    link
    English
    14911 months ago

    I’m guessing it’s an aluminum oxide abrasive? The abrasive is flourescing due to the little bit of uv coming out of the LEDs.

    You might find this interesting, if you are grinding iron or steel then the grinding surface may not flouresce due to the iron bonding with the aluminum oxide.

    • Troy
      link
      fedilink
      English
      3611 months ago

      This seems like a perfectly reasonable answer. OP! You could probably test this by changing the type of light you’re using. Try a red laser pointer as a control, and a black light wand (the sort they use to detect counterfiet bills), and see what happens.

      • @WogiOP
        link
        English
        40
        edit-2
        11 months ago

        Sadly I have neither of these things available on hand to test that theory but I can at least confirm that the abrasive wheel is a ceramic alumina.

        Actually NVM, I found a laser pointer and it has no effect, though it is admittedly quite dim.

        • Troy
          link
          fedilink
          English
          8811 months ago

          Complete tangent, but alumina, aka aluminum oxide, is usually considered the second hardest naturally occurring material. When it is found in nature, it is given the mineral name corundum and is clear. But if there are some impurities in it, you can get colours. Red corundum is called Ruby, and blue is called Sapphire. In the beauty industry, the same material (mixed with magnetite) is called emery, and lends its name to emery board, and is used in nail files. In the tech industry, it’s used to make the extremely scratch resistant coating on most modern phone screens (basically nothing but diamond will scratch it).

          You have subscribed to alumina facts. I’m sorry, the cat facts guy was busy.

          • @WogiOP
            link
            English
            4211 months ago

            We also use emery paper to smooth out rough surface finishes on machined parts. None of my tools but some of the tools the other guys have in the shop use little Ruby beads as reference surfaces. Our wire EDM also uses Ruby for some critical parts.

            You’ve been subscribed to machine facts, strap in it’s a bumpy ride

              • @WogiOP
                link
                English
                2011 months ago

                Fun fact, machinists do not have friends. Only mortal and natural enemies.

          • @Mango
            link
            English
            611 months ago

            Yo this is fascinating!

    • @9point6
      link
      English
      1
      edit-2
      11 months ago

      I saw “iron”, “aluminium” and “oxide” and I briefly assumed you were trolling until I looked again to check which one was the oxide.

  • AwkwardLookMonkeyPuppet
    link
    English
    21 month ago

    It sounds like you got the answer to your question, so I need to ask, what the heck weird kind of flashlight is that?

    • @WogiOP
      link
      English
      31 month ago

      It’s a cheap LED pen light, they hand them out like candy where I work. Most of us have our own flashlights anymore.

  • @regdog
    link
    English
    -1511 months ago

    What effect are you talking about? Is there a frog clinging to the underside of that stone, and you try to coax him out with a flash light?