• @[email protected]
    link
    fedilink
    647 months ago

    I learned a things:

    While it is true that the maximum output of a horse is around 15 horsepower, when you average the output of a horse over the course of a work day it ends up being around a horsepower. Watt defined this amount as “the amount of work required from a horse to pull 150 pounds out of a hole that was 220 feet deep”.

    • @[email protected]
      link
      fedilink
      English
      607 months ago

      Thank God it wasn’t something arbitrary like pulling a 100 pounds out of a hole that was 250 feet deep.

  • @[email protected]
    link
    fedilink
    207 months ago

    I remember reading somewhere that a single horse can actually output 12-14 horsepower. And an average human’s maximum output can be over 1 horsepower.

    • ChaoticNeutralCzech
      link
      fedilink
      217 months ago

      It’s a stupid unit because it averages long-term output including resting periods, and was inveted for steam engine marketing. At least it reflects the quantity it measures, reducing confusion some people have with kW and kWh.

      • @Duamerthrax
        link
        37 months ago

        It’s also based on a mule, not a horse. Specifically, the mules used for towing mine carts.

          • @[email protected]
            link
            fedilink
            3
            edit-2
            7 months ago

            It’s the same like with thousands separators and dates. We learned unit ÷ h in math.

            Though i have no excuses for lowercase/uppercase mistakes. edit: “it’s internet” is my excuse.

            • ChaoticNeutralCzech
              link
              fedilink
              6
              edit-2
              7 months ago

              Well, the capitalization is not as bad as the fact that it’s kWh (kilowatthours/Kilowattstunden), not kWh⁻¹ or kW/h (kilowatts per hour/Kilowatts pro Stunde). It’s a measure of energy so it goes up as power is consumed (or generated or whatever) over time, not the other way around!

              The capitalization is not as important here but sometimes, it absolutely is - mΩ is 10⁻³ Ω while MΩ is 10⁶ Ω - a billion (Milliarde) times more, or data units like Mb (megabit) and MB (megabyte) where one is 8x larger than the other. Sometimes, the people inventing units made really stupid decision, like 1 Cal = 1 kcal = 1000 cal, with both “Cal” and “cal” being called “calorie”. It’s almost as bad as “a billion” (American, recently also British English) = 10⁹ vs. ein Billion (German) = 10¹².

              However, I still think that capitalization is very important for all units, if only to show non-metric plebs the superior status of our standards. We have rules while they use MPH/mph and PSI/psi interchangeably.
              This reminds me – they denote “per” as another letter (MPH = miles per hour) or, unacceptably, not at all (PSI = pound forces per square inch). We denote inverse relationships like mathematicians, with fractions (slashes) and exponents. The ridiculous aforementioned offenders should be written “mi/h” and “lbf/in²”. Just imagine atrocities like this in metric, how does “going 60 kph on a 50cc bike” feel instead of the correct “km/h” and “cm³”?

              In short, we should be respectful to the people who made a better system than the alternative by following the good standards to ensure continued ease of use, error resilience and language independence of our system.

              unit ÷ h

              I thought Germans used the : symbol for division, like us Czechs.

              Encore rant for all the upvotes:

              All this kWh and Cal nonsense could have been avoided if we just used the SI unit “joule” and its multiples for all energy, which is one of my few metric system woes. Still, a factor of 3600 is better than 5280 feet in a mile, and imperial people have their own mess with energy units (kWh, Cal but also BTU, gallons-of-gasoline-equivalent and horsepowerdays or whatever). They can’t even get distance measurements to convert easily: you might remember 5280 but can you recall and apply the inverse logarithmic formula to convert between AWG and inches??

              • @[email protected]
                link
                fedilink
                17 months ago

                All this kWh and Cal nonsense could have been avoided if we just used the SI unit “joule” and its multiples for all energy

                Yes! J/s gives so much more intuition than W. Even kJ/h is fine. Using W and kWh is like using knots and measuring distance in knot-days.
                I might even prefer Coulombs per second over Ampère, so you immediately see that it’s a speed-like property.

            • ChaoticNeutralCzech
              link
              fedilink
              17 months ago

              It’s not by me; Nayuki is a very cool person. She made a cool PNG chunk analyzer on her website too, and has some interesting blog posts.

              As for the length: Well, I don’t actually mind some of the featured items but I find at least 3 particularly annoying.

  • @werefreeatlast
    link
    177 months ago

    Imagine Marlboro man doing this… Then riding into the sunset just before he feels the need for a cigarette 🚬 and then boom! Horse parts everywhere mixed with guy parts. Meanwhile a car driving through the near street gets rained on with pieces of the good stuff… anus, balls, penis, and skin with bloody hair on it as well as eyeballs, fingers and other parts easily recognizable to the layman. That’s why you never top off your horse!

  • Poplar?
    link
    147 months ago

    Oh god oh fuck not again

  • @Juvyn00b
    link
    English
    10
    edit-2
    7 months ago

    On the sign to her left someone should draw up a horse near the gas pump nozzle. “Helps your horse run like new”

  • @Death_Equity
    link
    67 months ago

    I can’t fix her, she is perfect as she is.

  • @Crack0n7uesday
    link
    37 months ago

    That horse is gonna kick that dude so hard he only has one hp left.