• essell
        link
        fedilink
        arrow-up
        10
        ·
        1 month ago

        A “raw” staple can also be good, though sometimes you need more than one

        • Schmuppes@lemmy.today
          link
          fedilink
          arrow-up
          9
          ·
          edit-2
          1 month ago

          I use a scalpel with the non-sharpened side of the blade to scrape the debris to the side and then blast it out with an air compressor. All the things I used before that were not pointy and thin enough to get inside the port.

          • ThePantser@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            15
            ·
            1 month ago

            The best I found was a plastic tooth flossing pick. Use the pointy side. It’s non conductive to prevent shorting of pins.

      • swagmoney@lemmy.ca
        link
        fedilink
        arrow-up
        3
        ·
        1 month ago

        i like to snap the toothpick so it splits on an angle. that way it’s narrower and the jagged edges grab onto the dust and crap

    • Live Your Lives
      link
      fedilink
      arrow-up
      5
      ·
      1 month ago

      If cleaning out the port with a stick still doesn’t work, try using a small amount of a high percentage isopropyl alcohol and a toothbrush to clean out the port. It’s done wonders for me.

  • Mangoguana
    link
    fedilink
    arrow-up
    30
    ·
    edit-2
    1 month ago

    Step 1: get wooden toothpick

    Step 2: sharpen toothpick (unless smoll enough)

    Step 3: patiently remove all the wool/dust/fiber in the charge hole. It looks like belly button lint.

    Step 4: your usb works again, and you didn’t need to change your 1000$ phone ffs

    • hobovision@mander.xyz
      link
      fedilink
      arrow-up
      20
      ·
      1 month ago

      Step 3 is actually break off the toothpick in the port.

      Step 4 is find that tiny sewing needle someone got you in a little sewing kit as a gift as if your not some kind of goblin.

      Step 5 wow this needle works great why did I think putting a literal splinter into my phone’s charge port was a good idea?

      • Mangoguana
        link
        fedilink
        arrow-up
        2
        ·
        1 month ago

        Metal bad for gold, wood breaks but does not scratch metal. Plastic works too but ive had more success with wood since i can shape it

      • whelk@retrolemmy.com
        link
        fedilink
        arrow-up
        4
        ·
        1 month ago

        Holy smokes, this actually worked! Still like my wireless charger but dang it’ll be nice to charge at places without one again

  • davetortoise@reddthat.com
    link
    fedilink
    arrow-up
    14
    ·
    1 month ago

    99% of the time this is caused by dust/blockage in the charging port! If your phone uses USB-C charging its very easy to clean with a needle without causing any damage.

  • But_my_mom_says_im_cool
    link
    fedilink
    arrow-up
    11
    ·
    edit-2
    1 month ago

    Get a little pin or toothpick and start digging at the charger port, you’ll be surprised at how much lint and gunk get in there from your pocket. Enough to prevent the charger from popping in fully. Also most times you need a new cord

    Mine looked like this when I dug in there

  • FireRetardant
    link
    fedilink
    arrow-up
    9
    ·
    1 month ago

    Mine did something similar where i often get false wet charger alarms and more often than not it doesnt charge or give me an alarm at all now. Luckily wireless charging seems to work consistently for now but i guess i should consider finding a new phone soon.

    • silly goose meekah
      link
      fedilink
      arrow-up
      7
      ·
      1 month ago

      pro tip: use wireless charging as much as possible, even when USB is still working

      not only does it make your USB port last longer, due to the lower amperage when charging wirelessly, it also helps battery longevity!

        • TriplePlaid@lemmy.zip
          link
          fedilink
          arrow-up
          4
          ·
          1 month ago

          Also it is important to know that wireless charging is much less efficient and therefore is environmentally worse than using a corded charger.

      • brap
        link
        fedilink
        arrow-up
        7
        ·
        1 month ago

        Oh yes. Wireless charging next to the bed and wireless charging quadlock in a vehicle. But mainly because my toddler likes grabbing wires.

        • Rooster326@programming.dev
          link
          fedilink
          arrow-up
          3
          ·
          edit-2
          1 month ago

          While I’ve done the same with wireless charging everywhere.

          Get magnetic USB cables they break off in case of a snatch.

          It will save you a huge headache one day.

          Then later on they use the cables to charge whatever old device you gave them. Make them responsible for charging their own devices - which would be very dangerous with a real USB connector.

          • brap
            link
            fedilink
            arrow-up
            1
            ·
            1 month ago

            Didn’t even realise that was a thing. Will look into that, cheers.

      • GissaMittJobb@lemmy.ml
        link
        fedilink
        arrow-up
        3
        ·
        1 month ago

        If you’re looking to limit the charging speed, wouldn’t it be better to limit it using software with a cable plugged in?

        I can’t say that I’ve ever felt that port longevity is a concern.

        I’m not fond of wireless charging as the device is essentially useless while charging, which is not true if you have a sufficiently long cable when charging. Iirc the energy efficiency of wireless charging is also lower than by cable

  • 5inister@reddthat.com
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 month ago

    I cut old credit cards into tiny hooks and wedges to remove lint, hair, fluff, and whatever else from the charging port because I’m scared of shorting the USB pins with a metal needle.

      • Ashen44@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        1 month ago

        A lot of it is packed in from the charger shoving it down there, compressed air won’t get that out.

  • unalivejoy@lemmy.zip
    link
    fedilink
    arrow-up
    6
    arrow-down
    1
    ·
    1 month ago

    At least you can still buy a new charger. Wait until your folding phone will only charge when the phone is at a certain angle.

    • Honytawk@feddit.nl
      link
      fedilink
      arrow-up
      3
      ·
      1 month ago

      That is why I bought a Fairphone, where I can replace the USB-C port myself for 15€.

  • Lka1988@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 month ago

    What in the hell are you guys doing to get that amount of lint in your charge port? Every phone I’ve had in the last decade has been USB-C, yet I’ve never had that level of buildup.

  • renrenPDX@lemmy.dbzer0.com
    link
    fedilink
    arrow-up
    2
    ·
    1 month ago

    I’ve seen the use of hot glue gun in charge port then removed once slightly cooled on YT repair channels. Never tried but might be worth looking into.