I’ve noticed some bulky cases trap a bit of heat around the bump, and night shots look noisier until I take the case off. Curious whether that’s been a real issue for you, or if I’m blaming the case for a software update.
#Android
Not particularly, no. Even after running a process that makes the phone toasty (BOINC!), the picture quality remains about the same.
“Night shot” quality is about how much light the camera can soak up.
If a case extends past the lens (it should to protect it) then that’s going to limit the total amount of light hitting the lens. A very small amount, but enough to matter sometimes.
If you’re super concerned, prioritize a wide angle around the camera holes to maximize light rather than the steep angle you’re more likely to find in thicker heavy duty cases.
So not really about the thickness of the case.
That’s not what OP is claiming. The reason night shot needs to soak up light is to drown out the sensor noise, and the suspicion here is that the phones internal heat is making the sensor noisier.
I mean…
-
I think you’re over estimating the amount of heat this generates.
-
You’re still talking about how to compensate for low light and ignoring the benefit of maximizing the amount of light.
So even if it was overheating, allowing more light to the lens would require less processing and thus generate less heat.
It’s contributing the improvement to what is effecting the core issue rather than trying to explain it with what’s at most a few degrees increase in temperature when the image is captured.
-
Oh, that’s interesting.
Any idea how accurate this is? (I’m no chip engineer, so this is way beyond my pay grade).
Never happened to me, been using cases since god knows when…


