Machinery comes is varying width. I would guess a farmer needs to decide at some point - is the priority using a 10-meter wide tool, or is it OK to settle with a 6-meter tool, or even a smaller one.
Basing on that, they’ll decide what the clearance between rows of panels should be. From an energy installation viewpoint, the shadow of one row should not cover another row during normal operating conditions. Assuming sun at 30 degrees elevation (“September on latitude 60”), the shadow of a fence that’s 1.2 meters tall will be about 1.75 * 1.2 = 2.1 m long. So from an energy generation viewpoint, one can pack things more densely than makes sense for farming.
Interesting. How well does this integrate with existing harvesting machinery?
Don’t want machines damaging the panels right?
Machinery comes is varying width. I would guess a farmer needs to decide at some point - is the priority using a 10-meter wide tool, or is it OK to settle with a 6-meter tool, or even a smaller one.
Basing on that, they’ll decide what the clearance between rows of panels should be. From an energy installation viewpoint, the shadow of one row should not cover another row during normal operating conditions. Assuming sun at 30 degrees elevation (“September on latitude 60”), the shadow of a fence that’s 1.2 meters tall will be about 1.75 * 1.2 = 2.1 m long. So from an energy generation viewpoint, one can pack things more densely than makes sense for farming.
Cool😊 the panels I’ve seen has been about 2m height, but that doesn’t change anything. The picture in the article looks almost miniaturised.