There’s a disclaimer that says not every Switch 1 game will work, but I think it will play on the new Switch with the same lousy performance it has now unless you buy the Switch 2 version.
That is how every previous Nintendo back-compat implementation has worked.
GC on Wii
Wii on Wii U
Game Boy on Game Boy Color
Game Boy/Color on Game Boy Advance
Game Boy Advance on (New) Nintendo (3)DS
Nintendo DS on Nintendo DSi
Nintendo DS/i on Nintendo 3DS
Nintendo 3DS on New Nintendo 3DS
In every case, the system drops back to the earlier console’s hardware specifications. There are hybrid cross-gen games on some of the handhelds which offer improvements on the newer hardware, but up to this point, older games have never been updated to get the improvements of newer hardware. That doesn’t necessarily mean the same will hold, but I’d suggest you assume it will and be pleasantly surprised if they buck the trend.
I’m those cases isn’t it because they had separate hardware built in for backwards compat? This is more of a PC style hardware upgrade rather than totally different hardware (compute wise) so it might be different for that reason?
Sort of, though Wii and Wii U are a bit more complicated than that so this somewhat of an oversimplification. The ELI5 answer is that some hardware components are directly upgraded and can run in a compatibility mode, other components are just the original hardware thrown in separately.
New3DS is the most recent and most notable exception. It’s directly upgraded 3DS hardware, but the CPU downclocks to run at 3DS specs on all legacy titles (and there are almost no native New3DS games so this upgrade was pretty pointless). Softmodding can unlock the full clockspeed, and most games do work fine this way but there are a few rare bugs.
I expect Switch 2 will just be the same architecture upgraded, because that’s a lot easier to do now, while the old style of true redundancy would inflate costs too much today. It’s also worth noting that Switch titles already expect variable performance in order to support handheld and docked modes, so I doubt much would break if allowed to overclock. But I could also see Nintendo not even trying to support it if even one bug might exist somewhere.
Another commenter elsewhere mentioned that things like Labo or Ring Fit won’t (likely) work because of the different sized controllers. I would be surprised if other games that don’t use special extra hardware work just fine.
Normally I’d disagree (because games written for a single console don’t do well with hardware upgrades), but since the old console already runs at different speeds when handheld and docked, I’d expect most games to be able to handle faster processors safely. We’ll have to see how that shakes out. If it really does run them better, and it has drift-proof sticks, I’m quite interested. Otherwise, I’ll wait a year or 2 until there’s a good, cheap library of games for it.
Ah so upgrade cost identical to what Sony did? I can see them doing that … The problem with that is that the games already have the ability on the cartridge. Remember the datamine of Paper Mario TTYD remake and the higher resolution data on the cart?
I would not put it past Nintendo to charge you $70 for Tears of the Kingdom again so that you can run it at reasonable resolutions and frame rates this time.
There’s a disclaimer that says not every Switch 1 game will work, but I think it will play on the new Switch with the same lousy performance it has now unless you buy the Switch 2 version.
That is how every previous Nintendo back-compat implementation has worked.
In every case, the system drops back to the earlier console’s hardware specifications. There are hybrid cross-gen games on some of the handhelds which offer improvements on the newer hardware, but up to this point, older games have never been updated to get the improvements of newer hardware. That doesn’t necessarily mean the same will hold, but I’d suggest you assume it will and be pleasantly surprised if they buck the trend.
I’m those cases isn’t it because they had separate hardware built in for backwards compat? This is more of a PC style hardware upgrade rather than totally different hardware (compute wise) so it might be different for that reason?
Sort of, though Wii and Wii U are a bit more complicated than that so this somewhat of an oversimplification. The ELI5 answer is that some hardware components are directly upgraded and can run in a compatibility mode, other components are just the original hardware thrown in separately.
New3DS is the most recent and most notable exception. It’s directly upgraded 3DS hardware, but the CPU downclocks to run at 3DS specs on all legacy titles (and there are almost no native New3DS games so this upgrade was pretty pointless). Softmodding can unlock the full clockspeed, and most games do work fine this way but there are a few rare bugs.
I expect Switch 2 will just be the same architecture upgraded, because that’s a lot easier to do now, while the old style of true redundancy would inflate costs too much today. It’s also worth noting that Switch titles already expect variable performance in order to support handheld and docked modes, so I doubt much would break if allowed to overclock. But I could also see Nintendo not even trying to support it if even one bug might exist somewhere.
Another commenter elsewhere mentioned that things like Labo or Ring Fit won’t (likely) work because of the different sized controllers. I would be surprised if other games that don’t use special extra hardware work just fine.
Normally I’d disagree (because games written for a single console don’t do well with hardware upgrades), but since the old console already runs at different speeds when handheld and docked, I’d expect most games to be able to handle faster processors safely. We’ll have to see how that shakes out. If it really does run them better, and it has drift-proof sticks, I’m quite interested. Otherwise, I’ll wait a year or 2 until there’s a good, cheap library of games for it.
Ah so upgrade cost identical to what Sony did? I can see them doing that … The problem with that is that the games already have the ability on the cartridge. Remember the datamine of Paper Mario TTYD remake and the higher resolution data on the cart?
I would not put it past Nintendo to charge you $70 for Tears of the Kingdom again so that you can run it at reasonable resolutions and frame rates this time.
I don’t think they’ll go that far, but the “upgrade” will probably be $15 or $10 extra