I have noticed phones with a handset (like the one in the image) have a little cover that resembles something like a cold camera shoe under the bottom of the handset’s top speaker holder. Is there a use for it? It has a line bump in the middle, but it doesn’t go all the way from both sides, it leaves a gap. I have also seem some of them have extra space on the top of the cover, and some don’t.

  • @hperrin
    link
    81
    edit-2
    1 year ago

    Or maybe you meant this thing. Yeah, it keeps the handset in when the base is mounted vertical. You can see that it’s slanted in the back.

    That’s so it slides in and out on this other slanted lip on the handset instead of getting caught on it. You can take the handset off just by pulling it directly away from the wall.

    • @hperrin
      link
      721 year ago

      Btw, on Trimline phones it is reversible for if you’re not hanging it on a wall. It looks like this when you pull it out.

    • Em Adespoton
      link
      fedilink
      401 year ago

      Exactly this. It’s called a “hook” and when the phone is “off the hook” that’s the thing it is off of. Being off the hook means the phone is powered up and connected to the local loop. When the phone is “on hook” that means it is disconnected from the loop and awaiting the pulsed ring signal.

      Desk phones have a reversible hook so that it keeps the button depressed when the phone is in the cradle but doesn’t catch when you attempt to pick it up.

      On modem signals in the old days, the + was equivalent to “flashing” the hook, or quickly disconnecting and reconnecting to the loop, and the AT command H1 told the modem to go “on hook” while H0 told it to go “off hook”.

      Back before the DTMF network, when everyone used pulse modulated phones, the “pulses” were caused by going in and off hook in a specific pattern. You could actually make a phone call from a rotary payphone by flashing the hook in the pattern that mimicked the rotary dial pulsing the line as it rotated back to home position.

      In the really old days, the hand crank served much the same purpose, but actually supplied electricity to the local loop; when the phone was on hook (which was a big metal thing the earpiece sat in) someone else turning the crank would make all the phones on the loop ring; you picked up if the ring matched the number of rings for your extension.

      • @hperrin
        link
        81 year ago

        Yes! Another phone nerd!

        One small clarification. There’s not really anything special to the pulses for pulse dialing. One pulse for the number 1, all the way to nine pulses for number 9, and then ten pulses for a number 0.

        • @froh42
          link
          9
          edit-2
          1 year ago

          In the 80s there was a way to cheat phone booths in Germany: With a small tool that had an adjustment screw you could position the hook switch to an exact position where the phone booth had already connected the line but did not yet power up the rest of the machinery (including coin counters)

          You could then call arbitrary nunbers by pulse dialing using the hook switch (the rotary dial was still powered down)

          Basically a EU pulse dial version of phreaking.

          My father, who died this year, used this a lot too make “free” calls in the 80s.

      • Mwalimu
        link
        fedilink
        61 year ago

        Me, deep in the night, reading about modem signals and off the hook. I love forum threads. They have taught me more than I can imagine.

      • @SgtAStrawberry
        link
        11 year ago

        So that’s how you used the old hand crank phones, I never know. I thought you turned the crank to get power into the phone and then told the person working the switch bord who you want is to talk to. And that when you were telling you sometimes needed to re turn the crank to get more power.

    • @hperrin
      link
      261 year ago

      Much better than the older design which cannot be mounted on the wall.

      • @hperrin
        link
        231 year ago

        And the even older design that didn’t even have a bell integrated in the base. The bell was in a separate bell box.

        • @hperrin
          link
          29
          edit-2
          1 year ago

          Or one of these real old designs that didn’t even have a bell. It has a buzzer that’s barely audible (it might even just be the phone’s speaker, idk). Also, the microphone and the earpiece aren’t in a convenient handset.

          This one is a replica made in probably the 1970s or 1980s. It’s funny, when it was made it was a replica of something vintage, but now it actually is vintage.

          • @Vacationlandgirl
            link
            161 year ago

            You have a very interesting phone collection and I appreciate you sharing! Unlocked memories I didn’t even know I had! 😃

          • @A_Very_Big_Fan
            link
            English
            141 year ago

            Huge props for the unexpected old phone exhibition. It was very interesting, thank you :3

          • @HeyThisIsntTheYMCA
            link
            English
            21 year ago

            Dude those are really cool phones. I had forgotten how much I miss rotaries.

      • RBG
        link
        fedilink
        201 year ago

        Well, cannot be wall-mounted like the one in your picture but those phones did get wall-mounted in slightly different shape. 1000038469

        • @hperrin
          link
          7
          edit-2
          1 year ago

          Interesting. I’ve never seen a phone like that. Usually the wall mounted versions of the Model 500 had a hook for the handset in the front of the base to hang the handset vertically. This one looks like a different company than Western Electric though. I’m guessing it’s a UK company, because it’s 999 for emergencies (or at least it’s not US). You’ve got me curious enough I feel like I’m about to go down a rabbit hole.

          Edit: yep, it’s a UK company called GPO. This is their model 741:

          https://www.britishtelephones.com/t741.htm

          https://gpospares.co.uk/gpo-spares-gpo-bt-741-wall-dial-telephone-two-tone-grey.html

          What a cool design! I would love one for my collection.

          • RBG
            link
            fedilink
            31 year ago

            Oh, I was not aware you are into this as a collector, now I feel honored to be able to show you something new!

            I live in Europe, not the UK though, so maybe that explains why these are familiar to me. Although another user said they saw one in Ohio.

          • @Indie59
            link
            31 year ago

            We had a yellow one like that hanging on our kitchen wall in Ohio, so they were definitely around.

    • @AnUnusualRelic
      link
      81 year ago

      Like and follow for more astonishing technologies from bygone eras!

      (Do people really no longer have phones on their desks or what?)