• @trxxruraxvr
    link
    English
    428 months ago

    I know that triangle because of Dwarf Fortress

    • @UNY0N
      link
      English
      7
      edit-2
      8 months ago

      Dig dig dig

      • @MisterFrog
        link
        English
        5
        edit-2
        8 months ago

        Not a programmer, but all this is is a representation of three columns of data in a table, plus a fourth for the label. Make a lookup table with 4 columns. Now make rows with the data in it, assigning the label for each.

        This chart is just a nice way of representing 3 variables in 2D form. It’s just an XYZ graph in 2D. With the constraint that X+Y+Z <= 100. You could even assign functions for those different labels.

        Though, me not being very good at maths, I’d have no idea how to write a function to cover those areas.

        Probably easier just having a lookup table.

        As an example, though, a line going from the top of the triangle to the bottom, in the middle would be:

        Clay(silt,sand) = 100 - Silt - Sand, where sand=silt Thus, Clay = 100 - Silt, where Clay+silt+sand<=100 would be a vertical line on the chart.

        I think. I’m just having fun trying to work this out, without looking it up now.

  • @[email protected]
    link
    fedilink
    English
    308 months ago

    If I print this off and put it up in the Earth science department, will it start a war?

    • Tar_Alcaran
      link
      fedilink
      English
      148 months ago

      Probably not. I’ve seen this chart in multiple geotech companies. It probably gets pointed at a lot when another contractor goes “but this is obviously sand!”

  • @FilthyShrooms
    link
    English
    208 months ago

    How the hell am I supposed to read this chart? I picked a spot and got a total of 140%, that’s too much soil!

    • @davidgro
      link
      English
      208 months ago

      The lines to follow are the ones at the angle that the little arrow points. Which is ‘down and to the right’ from each side if you put that side on top

    • Dravin
      link
      English
      8
      edit-2
      8 months ago

      Ternary plots (aka Triangle plots) have three axes rotated and layered on top of each other. So when you get a point like this:

      You read it as 50% of the way up the clay direction:

      30% of the way up the sand direction:

      20% of the way up the silt direction:

      So it is 50% clay, 30% sand, and 20% silt.

    • @[email protected]
      link
      fedilink
      English
      68 months ago

      pick a junction, follow the line to the left, the top right one and the bottom right one

    • @Mango
      link
      English
      68 months ago

      You need longer arms.

  • Codex
    link
    English
    168 months ago

    Somehow I’m bothered that Sandy Clay Loam and Silty Clay Loam are both a thing, but Loam is already the “Silty Sandy Low-Clay Loam” and a the middle-most area is “Clay Loam” instead of pure loam. WHY IS CLAY’S POWER SO GREAT!?

    Is this what keeps the soil kingdoms in balance? The two rivals, silt and sand, locked in eternal hatred and yet forced to cooperate to maintain balance against the all consuming Clay Empire?

    • @Aleric
      link
      English
      11
      edit-2
      8 months ago

      deleted by creator

      • @[email protected]
        link
        fedilink
        English
        88 months ago

        My favorite “Big X” thing was something I just found on lemmy recently, it had me laughing harder than it really should have tbh.

        “Big Small is just trying to get you to buy more less!”

  • @[email protected]
    link
    fedilink
    English
    128 months ago

    Areas with loam touch all three sides. So… Some kind of loam exists without sand, some without clay and some without silt. I am not a soil scientist but I’d guess that any substance that contains neither is a kind of loam.

    • @ninja
      link
      English
      38 months ago

      deleted by creator

  • @weariedfae
    link
    English
    108 months ago

    Man I’ve gone my whole career without ever dealing with this BS. We use USCS. One time my boss had to deal with it because of some permitting shenanigans with an agency (USDA?) and he said it was stupid.

    • @The_v
      link
      English
      88 months ago

      It makes more sense if you use it as intended. It’s designed to be a simple way for farmers/gardeners to classify the basic soil composition by particle size.

      Take a cup of dirt, put it in a mason jar, fill it full of water, put a lid on tight and shake the hell out of it. Come back in 3-4 days and measure the layers.

      This comes in helpful in applying pesticides and basic water management. It’s pretty much pointless for anything else.

      • @[email protected]
        link
        fedilink
        English
        18 months ago

        I’m going to try this with some dirt and see if I can identify what the dirt is made of that easily or not.

  • @thessnake03
    link
    English
    108 months ago

    I love it when you talk dirty to me