• @[email protected]
    link
    fedilink
    English
    301 month ago

    Theyre from Adelaide and they call it the O-Bahn.

    Idiots occasionally drive their cars onto the track entrances near the city.

    • @mecfsOP
      link
      English
      271 month ago

      They can also be used on non-guided tracks — ie. vehicles cleared to work on roads too with a driver. More versatile.

          • @[email protected]
            link
            fedilink
            English
            21 month ago

            Was watching a YT video against this idea. Basically the occupancy is quite low per dollar, and generally there’s not much expertise in building them. This means the city/state is tied to one company which can ream them price-wise. If you need the occupancy, get a train.

        • @Valmond
          link
          English
          41 month ago

          The best one.

        • @[email protected]
          link
          fedilink
          English
          41 month ago

          If the buses use electric traction and charge continuously whilst on the guideway, that could be a win, in allowing for smaller batteries and less downtime than a regular electric bus (especially if the unguided portion of the route is a “last mile”, comprising a relatively small proportion of the route). If they’re just regular diesel buses, it seems somewhat pointless.

          • @[email protected]
            link
            fedilink
            English
            11 month ago

            Yeah, but what’s the advantage of it being guided? Instead it could have just be a private road that supports trolleybuses as well as emergency vehicles. Instead, it’s a gadgetbaun.

            • @[email protected]
              link
              fedilink
              English
              11 month ago

              If it is travelling on a precise guideway (more precisely aligned than a traffic lane), then it is possible to transfer electrical power to it safely, either by aligning a pantograph with an overhead catenary or by a system of conductive rails, Once you can do that, the vehicle’s weight drops (as it doesn’t need to carry as much fuel), increasing carrying capacity and/or reducing the frequency of required road maintenance, Additionally, as electrical power is fungible (and can be sourced from whatever generation method is most economical), running costs are decreased over combustible fuel (as long as you don’t need to store it in the vehicle).

                • @[email protected]
                  link
                  fedilink
                  English
                  11 month ago

                  A trolleybus’s speed is limited by the need to maintain contact with the cable (or two cables, as the current needs an earth connection, which doesn’t help). A fixed guideway allows the vehicle to travel at higher speeds whilst retaining contact.

            • @[email protected]
              link
              fedilink
              English
              11 month ago

              The obahn in Adelaide is elevated, near a river. Not often near other roads for emergency vehicles so would be of limited use for that. The bus has small horizontal wheels that keep it on the tracks, and allow it to go reasonably fast, about 80 km/hr between stops. Once it gets closer to the city, it does just use dedicated bus lanes, that emergency vehicles can also use. It’s not perfect, but works pretty well and at morning rush hour I can catch a bus every minute or so from my stop. Most of the buses are pretty full, so that’s a lot of cars off the road. Once the buses are full electric I think it will be even better and quieter.

    • @[email protected]
      link
      fedilink
      English
      131 month ago

      They drive on special tracks from the city out to the suburbs in a fraction of the time it takes to get there by car, then they just hop off the tracks and resume normal bus routes.