Replaced tailgate around Christmas after a collision, and now noticing condensation inside a taillight. Body shop says they’re not responsible and are quoting $250 to replace. Please advice.
You can always just drill a tiny hole at the bottom of the light and that will allow it to drain it’s a 5 minute fix and nobody will ever notice it
[email protected] [email protected] [email protected]
and many called diy on just about every big instance [email protected] [email protected] [email protected]Nice, thank you
Tell your mechanic the indicator fluid is leaking.
where blinker fluid?
Those things are supposed to be sealed. Even if they did nothing wrong installing it, they’ve installed a faulty taillight with a busted seal.
Id argue with them along those lines “It’s no one’s fault, but I didn’t pay for a broken tail light”.
Unless you replaced it with a used tail_gate_ they pulled from a junkyard, in that case you’re on your own.
You can get a new tail light for not a ton of cash.
That is a factory light. It’s a 2022 CRV. They’re saying they only pulled it out as a unit and put it back in, and this seal failing has nothing to do with them.
What components did they replace with the original work? Did they just replace the bumper cover?
If you were charged for a new tail lamp/light assembly in the previous work, then this is on them. If they only pulled the original tail lamp as part of other work, and reinstalled the original tail lamp, then the tail lamp was probably cracked in the collision. That damage would be easy to miss and can take a long time to become apparant. It sounds to me like this component was not replaced in the original work and you are only now discovering damage that was sustained in the collision.
Too long to find an actual reasonable reply in this thread.
Likely cracked in collision, they probably didn’t see the damage to it, likely didn’t replace it. Buy the piece and replace it if it’s that big of a deal. These pieces are all bolted on from the inside, after taking a few bolts out. This piece can be had as an “Inner Tail Light”, for $70, and replaced in 10 minutes with a small set of hand tools.
It’s already easily accessible in this car because you’ve gotta be able to replace the bulb, so it’s likely as simple as opening a hatch or door panel type thing behind it.
This piece can be had as an “Inner Tail Light”, for $70, and replaced in 10 minutes with a small set of hand tools.
If I’d already decided on spending $70 to replace the light, I think I’d just drill a small 1/8" (or 1mm) hole in the outside lens in the corner. It would be on the lowest point so liquid water could drain out, but at an upward angle from the bottom so rain and other water wouldn’t fall into this new hole. This would be on the bottom left hand size of the light lens where you see the water pooling. Right at the green arrow:
The whole fix would take less than 5 minutes. If this fix doesn’t work, or make it worse, then I could still fall back to the “spend the $70 on a new light and replace it”.
Just replying to chime in that I agree with Fermion and Kitnaht. It’s definitely possible there could’ve been an invisible hairline crack in the housing that went unnoticed by the mechanic.
It’s already easily accessible in this car because you’ve gotta be able to replace the bulb
I know it’s a different manufacturer, but having had to replace multiple headlights on my 2008 Prius over the last decade or so… I can say this is definitely not a hard and fast rule.
Headlights are a totally different beast. This is a tail light, on the rear hatch. I haven’t really had a car yet where the tail lights were difficult to get to.
They could potentially fix it for even cheaper by repairing the piece:
- take the piece off
- let it dry out
- find the break in the seal
- use an adhesive to reseal the break
- install the piece back on the car
It’s a little more effort and time without the working light, but it might be helpful depending on @[email protected]’s financial situation.
It’s not on them. They don’t pay to fix your wreck, it’s the other way around. It’s part of the wreck that wasn’t noticed when it was being fixed. It happens, and it can’t be helped unless they park it outside and let it rain and then check it and nobody does that.
If insurance paid for the wreck, get with the insurance company to pay for a new one. If you paid for the wreck, you could have paid for it when it was fixed but it wasn’t noticed so you pay for it now.
The tailgate was replaced due to a collision but they didn’t install new taillight housings?
I haven’t had to make an insurance claim for an accident but years and years ago my parents neighbor backed into their car and left a big dent in the C-pillar (right behind the back passenger side door) and the insurance adjuster went as far as stating the trunk lid and bumper would need to be replaced even though they has no damage.
I’m surprised your insurance would reuse parts physically housed in the very tailgate that was damaged since they were likely damaged as well.
Apart from arguing with insurance about having it fixed again, my only suggestion would be replacing it yourself as it’s typically very easy. RockAuto has these listed for $60 (from TYC).
I’m with the other people here saying the same thing, that’s a salvaged tail light that was damaged in a wreck. That it was your tail light before it became salvage doesn’t make it ok.
And just because I know how those shops work, if at any point they said something like “we’re gonna reuse your old tail light” and you signed off on that, you might be out of luck.
Maybe your insurance company might be able to cover it under the same claim? It’s worth a phone call or email at least.
If you don’t want to DIY, definitely shop around for a better quote, but you might not find a cheaper total price. I wouldn’t burn a bridge with that shop.
They’re bullshitting you. Dealerships break things on purpose to get you to spend more money. Get a quote from another shop and demand they pay for parts and labour.
Whike there are shops that do break things to get more work, they are not that common. Cars have issues all the time that will keep the vast majority of shops busy without needing to manufacturer their own business.
Not fixing things that insurance paid for is more common.
I’ve worked as a mechanic at a dealership before. A bit of condensation is petty normal, even on luxury cars. Walk across a Mercedes parking lot early on a cold morning and you’ll find that most cars have a bit of moisture in their headlights. It’s not very “premium”, but it’ll go away after having the lights on for a minute.
To answer your other question, there’s [email protected].
If it’s any consolation, it happened to my brand new Subaru as well, and our older Hondas too. It tends to burn off quickly.
[email protected] (is not specifically for mechanical advice, but it’s small enough that we’ll help if needed.)
These tail light assemblies should be sealed plastic units (two clamshell halves) that are glued into a cavity in the tailgate. Most of the time when I see condensation it’s because the vent on the inside of the cavity, open to the car compartment, is blocked. Less frequently the two halves of the light assembly are not glued together right but it can also happen.
Removing the bulbs and shooting compressed air inside for a few minutes usually dries them out.
I’ve never seen the lights like this glued in. The lights have studs in the back, they go through a hole and you put a nut on them.
Yeah they’re off a bit on the description as the taillight is simply bolted in but consists of two halves of plastic glued together (inner shell and outer lens).
Depends on manufacturer, maybe a misuse of words on my part… They do use studs and nuts but the sealant is often a rubberized sealant (similar to windshield adhesive) that acts like a glue. Some manufactures use foam gaskets, which suck balls.
Personally I use silicone glazing sealant (dow 1199) when I reinstalled my Honda tail lights and it works fine.
I had a similar issue with my Civic from the factory. Not to take their side on it, but same issue. Driver side rear light, and the section on the trunk.
I took it as an opportunity to do some work on my own, and replaced all the rear lights (the single replacement OEM light was like $200, and a new set of sequential LED lights was $300 and looked much better). It’s not too bad of a job, took me an afternoon cause I’m way overly cautious with stuff. Around the same time frame too; mine is an '18 and I did it in '21 I think.
There’s a good chance the seal for the tail light was damaged during the collision and the body shop did nothing to damage it.
No body shop will admit this especially if it is months after the repair. Condensation is typical in such repairs since the adhesives they use are not most of the times proper and the fitting is not the best.
Those lights are bolted in, there’s no adhesive. There’s probably a seal but that’s to keep water from getting into the tailgate.
Does that mean this is shoddy workmanship but I’m shit outta luck?
Did your insurance cover the repair? If so, you might be able to use them as leverage. Most insurance companies will work on behalf of a customer who gets fucked over by the collision department.
My 2010 Highlander was involved in a front-end collision. When Shit Collision, Inc, replaced the plastic bumper they broke the two body panel brackets that held the quarter panels above the wheels to the new bumper. Rather than admit the mistake, suck up the cost as a mistake, and carry on, they told me it’s “supposed to be like that” (i. e. sticking out an inch and a half from the rest of the car’s body).
No matter the amount of bullshit I called on them they wouldn’t budge. So I called my insurance company. After a tense exchange between Manager McNuts and Adjuster Andy, the body shop still said no so I went elsewhere, insurance covered it, and Shit Collision, Inc., is an empty brick building now.
If this was an insurance repair, contact your insurance company. They have policies for when additional repairs are needed afterwards. Tell them it’s something you noticed later. And if it’s anything that could plausibly be related to the accident, they should cover it. It’s possible there is still concealed damage that is putting stress on the light causing it to separate and let moisture in. If your insurance company OKs it, I would let a different body shop handle the repair and check out the previous work.
If you paid out of pocket, you’re probably out of luck at this point.
If it’s a factory part it should be an easy warranty replace. They’ll still charge labor probably but the part should be free.
put a bead of clear silicone around the top and side seals of the light (where the light sections come together, not where the light seals to the car)
https://youtu.be/H2_uUZ3moYw?si=RICT9gGBaTOo36pS&t=26 follow from 0:26-0:46. Pull the housing off the hatch and remove the lights to air out. Inspect for any damage.