• @[email protected]
    link
    fedilink
    English
    691 year ago

    Brother printer is probably the best brand if you want it to “just work” but still have support.

    I paid the premium price for a color laser printer scanner combo - about $450 I think - seven years ago and I haven’t paid a cent since. It’s done everything just fine.

    • @DoomBot5
      link
      English
      171 year ago

      Adding to this. Consider what your printing habits are. For me 99% of what I print are documents, and even those are rare. A $110 black & white Brother laser printer was enough to meet my demands. Been running on the original toner for a good 5 years.

    • Dizzy Devil Ducky
      link
      fedilink
      English
      61 year ago

      I have heard so many different people praising Brother printers and coincidentally my dad got one from his work that they were just getting rid of because they were upgrading. Cannot say how good it is yet since we’ve only printed a couple of pages, but I’m excited because of all the praise I have heard.

      • L3ft_F13ld!
        link
        fedilink
        English
        81 year ago

        When I was still doing IT support as a job, I hated every single printer I ever had to deal with. This was until I dealt with my first Brother. I ended up buying one for myself eventually and it’s the only brand I’ll ever recommend.

    • @[email protected]
      link
      fedilink
      English
      21 year ago

      I have one, and they are great. But wasn’t there just a scandal about a recent firmware update that applied DRM to ink?

        • GonzoKnowsOP
          link
          fedilink
          English
          21 year ago

          It’s good cause you can’t drm ink. And the bottles can be refilled my biggest concern right now is. Can it be used without Wi-Fi and just via usb cable and I’m looking into the linux support for it

  • 𝒍𝒆𝒎𝒂𝒏𝒏
    link
    fedilink
    English
    251 year ago

    Visited my parents a while ago who got a new Brother ethernet printer. It was available immediately from the printers menu on my Linux laptop, no installation needed or anything

    My next personal printer will probably be a Brother too

    • @fuggadihere
      link
      English
      11 year ago

      That is a 3D printer no? Technically a printer :)

  • LazaroFilm
    link
    English
    16
    edit-2
    1 year ago

    Voron 2.4R2 is a great printer. All open source and fully programmable.

    • GonzoKnowsOP
      link
      fedilink
      English
      71 year ago

      Looking for printing on paper but thanks for the 3d recommendation

      • LazaroFilm
        link
        English
        51 year ago

        Omg! I didn’t even think of that! Lmao. Anyways. boron are great for 3D.

  • TrinityTek
    link
    fedilink
    English
    101 year ago

    A little off topic from your DRM/open source query, but since so many people are praising brother, in my opinion they are ruining their printers due to the jacked up toner cost. It’s not even just brother. Basically all the greedy printer manufacturers have all but ruined affordable laser printing. Years ago you could buy a brother printer for a reasonable cost that used toner that cost about a penny per page to print. They shrank the toner cartridges but didn’t reduce the cost so it’s not uncommon to speed a few cents a page on toner these days. Compare that with the current ink tank options and you’ll find the cost is way lower at around $.002 per page. The biggest trade off in my opinion is that you have to print to them regularly or they clog up and they are slower, but they are definitely a better value.

    TL DR: greedy printer manufacturers ruined laser printers. Buy an ink tank printer instead until they ruin inkjets again.

    • @mint_tamas
      link
      English
      81 year ago

      You can buy third party toners for brother (if it comes without a chip, you just need to move it from the original toner.

  • @[email protected]
    link
    fedilink
    English
    7
    edit-2
    1 year ago

    Good question.

    last time I saw a thread about good printers on Riddit someone said basically any 90s model resell, or LaserJets if it should be modern.

    In terms of open source / no DRM tho, no clue. Maybe they just don’t exist or you almost have to build them from scratch?

    • @just_another_person
      link
      English
      211 year ago

      Pretty much anything by Brother. They encourage self-service, have super cheap consumables, are very efficient, and have some of the best plug and play experience around.

      • partial_accumen
        link
        English
        171 year ago

        Pretty much anything by Brother.

        Brother LASER. Inkjets still suck no matter the brand.

          • @DoomBot5
            link
            English
            21 year ago

            Oh yeah, my mom has been running a fax/inkjet printer from Brother for a good part of a decade. Ink is super cheap, and it works really well. Only downside is that printer isn’t networked.

            • @just_another_person
              link
              English
              31 year ago

              Network print server dongle is about $40 from any one of the usual networking companies, or an RPi0w is about $15. 🖖

              • @DoomBot5
                link
                English
                21 year ago

                I ended up getting her a used network printer before those dongles existed. She’s just stubborn with what she will use. Honestly, I might just buy her a replacement laser printer and toss out all the old ones at some point. She finally admitted not needing a fax anymore a couple years back.

  • @AgentCodyBanks
    link
    English
    51 year ago

    Was talking with my coworker about this the other day and we have both been very impressed with the Kyocera ECOSYS printers one of our customers has been buying.

  • Brownian Motion
    link
    English
    21 year ago

    Brother MFC-J4440DW Colour Laser, scanner (and fax lol!) $299AUD and the toner cartridges are $39 each (x4) so ~$160 for enough toner for approximately 3000 pages. The printer already comes with toner.

    If you don’t need more that 20 pages a minute, or higher than 1200x4800 dpi prints, then its hard to beat this!