Terrifying

  • @slaacaa
    link
    English
    63 hours ago

    “At long last, we have created the Torment Nexus from classic sci-fi novel Don’t Create The Torment Nexus”

  • @hark
    link
    English
    23 hours ago

    Now have it stand on the ground without supports.

  • @[email protected]
    link
    fedilink
    English
    208 hours ago

    Maybe a weird aside, but what does this mean?

    pushing fluid at 40 standard liters per minute.

    Are there “liters” other than the 10cm x 10cm x 10cm definition?

      • @[email protected]
        link
        fedilink
        English
        23 hours ago

        Thanks, you succeeded hahaha.

        From what I’m reading there this is a measure of mass flow rate of gas, expressed as volume per minute at some standard volume and pressure. Which makes some sense, you need those two parameters to be fixed so you can measure mass by volume.

        And then I realized the OP article uses it for a fluid 😂

    • @WhiteRabbit_33
      link
      English
      57 hours ago

      Volume changes based on temperature and pressure. So when we reference volume measurements like for flow rates, we typically do the math to adjust those to standard temperature and pressure. Standard pressure is 1 atm but standard temperature varies based on who you’re talking to because of competing standards. It’s usually 25 C or 20 C.

      When we want to reference the non temperature and pressure corrected volume, we append actual to it so that people know what the measurement is. Some people don’t do that and that causes confusion for others using their work if the reading is standard or actual.

    • Encrypt-Keeper
      link
      English
      48 hours ago

      You mean the flow rate of a volume of liquid? What are you confused about exactly?

      • @Yttra
        link
        English
        57 hours ago

        They’re asking why it’s “standard litres per minute”, instead of just “litres per minute”

        • Encrypt-Keeper
          link
          English
          2
          edit-2
          7 hours ago

          Oh, well yeah Standard liters per minute or SLM, specifically refers to flow rates measured in the U.S.

          So the “other” measurement would evidently be Europes “Normal liters per minute”.

          What the difference is, I couldn’t tell you.

  • @[email protected]
    link
    fedilink
    English
    5612 hours ago

    We really are obsessed with replicating any and all sci-fi cautionary tales, aren’t we?

    • @OZFive
      link
      English
      1710 hours ago

      It’s the Torment Nexus dilemma.

      • @buddascrayon
        link
        English
        46 hours ago

        I’m currently using ChatGPT to develop code that I intend to incorporate into my latest version of Roko’s basilisk v0.17.13

  • @Visstix
    link
    English
    1910 hours ago

    I see they are prepping for the live action QWOP movie.

  • @jacksilver
    link
    English
    89 hours ago

    Can’t wait to find out it was just a guy in a suit.

  • enkers
    link
    fedilink
    English
    8314 hours ago

    They really did go for the “horror movie about to go very wrong” aesthetic when they made those videos, didn’t they.

  • @[email protected]
    link
    fedilink
    English
    19
    edit-2
    12 hours ago

    Let’s ensure we also make household robots unreasonably strong and durable. We don’t want shotgun wielding humans to be able to disable one, or barricade in a house.

  • @[email protected]
    link
    fedilink
    English
    3213 hours ago

    It’s clear they made this weird on purpose but still, so many questions…

    the robot hangs suspended from the ceiling as its limbs twitch and kick, marking what the company claims is a step toward its goal of creating household-helper robots

    Oh yeah, definitely a huge step in that direction…

    Clone Robotics designed the Protoclone with a polymer skeleton that replicates 206 human bones

    That’s all of the bones of an human adult. Yeah, I’m sure absolutely all of them were necessary.

    • @[email protected]
      link
      fedilink
      English
      58 hours ago

      That’s all of the bones of an human adult. Yeah, I’m sure absolutely all of them were necessary.

      Are you trying to imply they gave it a dick? If so they don’t have bones in them.

      • @Cornelius_Wangenheim
        link
        English
        137 hours ago

        No, it’s pretty much only you thinking that. The rest of us were thinking about the 6 tiny bones in the ears only used for hearing or dozens of weird little bones in the wrists and ankles.

        • @[email protected]
          link
          fedilink
          English
          67 hours ago

          Exactly, ear in particular was what I thought about. There are very tiny bones in there. I’m pretty sure they didn’t replicate a functional human ear, so those have no impact on anything.

          Many bones in the hand and foot are also locked in place together, so modeling each one seems, well, I don’t think it’s a waste of time, but at this point you’re making an art performance.

      • @[email protected]
        link
        fedilink
        English
        27 hours ago

        I have literally no idea how that came to your mind immediately. It’s very funny to me that it did though.

    • @[email protected]
      link
      fedilink
      English
      3112 hours ago

      I don’t understand these companies’ obsession with humanoid robots. A robot doesn’t have to humanoid to be a useful household helper. It doesn’t even have to be humanoid for people to form a friendly bond with it (something I think would be a good quality in a “household helper”) just look at Star Wars droids

      • @jj4211
        link
        English
        33 hours ago

        See also: Cogsworth

      • @[email protected]
        link
        fedilink
        English
        1912 hours ago

        Some of this is also about less complicated ways to use patents that can also be applied to things like prosthetic limbs.

        Also, it provides a control case with how well-studied human anatomy is. In terms of basic mechanical motion, there’s a clear baseline goal.

        I remember seeing early versions of the synthetic muscle fibers years ago, but as far as ways to practically apply them and test, and refine them as control technology improves with machine learning. 10-15 years ago, this wasn’t really possible.

      • @[email protected]
        link
        fedilink
        English
        1011 hours ago

        A humanoid robot can operate in the existing world. It can climb stairs and open a door, for example. A robot on wheels without arms can’t do that.

      • @acosmichippo
        link
        English
        411 hours ago

        if you want it to interact with a wide range of environments and objects that were designed for humans, then a humanoid robot may be the way to go.

    • Cyrus Draegur
      link
      fedilink
      English
      913 hours ago

      Maybe they’re attempting to make it ‘learn’ how to move itself using neural networking instead of programming discrete movement presets.

        • Cyrus Draegur
          link
          fedilink
          English
          111 hours ago

          the only thing I’m hoping for is that this can serve as a proof of concept that human brains might be able to learn to control limbs made of synthetic muscles like that…

    • @[email protected]
      link
      fedilink
      English
      813 hours ago

      It’s definitely made that accurate/creepy for marketing reasons, they’re probably hoping this will help them get investors. I would also assume you can simplify the human body design a good bit before losing the functionality we actually want from something like this.

    • @systemglitch
      link
      English
      311 hours ago

      The goal is to replicate humans, so yeah

    • SeaJ
      link
      fedilink
      English
      613 hours ago

      How is it going to balance if it does not have a fake cochlea? /s