• @[email protected]
    link
    fedilink
    English
    369 months ago

    If the system is working, what’s the big deal? Is not like this needs to be running on windows 11 with the ability to send out tweets and Instagram posts. Relying on floppies may seem archaic but it’s better than spending $10B and years of ‘project delays’ just to wind up with a functionally similar system using modern hardware.

      • @[email protected]
        link
        fedilink
        English
        129 months ago

        That’s probably the real driver here behind the push to upgrade and the article. Some grubby, underqualified company wants a giant contract with little responsibility to deliver a working product.

        • @DrunkEngineer
          link
          English
          79 months ago

          It is actually much worse than that. The problem they are having is that street-running LRT trains get stuck in traffic, causing bunching and other scheduling issues. The obvious solution is to get cars completely out of the way of the trains. But despite an official “transit first” policy, the SFMTA won’t do that. So instead they will spend >$100 million on a new signal system, which will map train locations in real-time simply to tell dispatchers what they already know – that the trains are stuck in traffic.

    • @TexasDrunk
      link
      English
      59 months ago

      As long as they can still get floppies to replace them as they go bad I don’t see a problem. They’re still being made for things like old geological and industrial equipment and will continue being made for a while.

        • @TexasDrunk
          link
          English
          29 months ago

          Ohhh, good info! I didn’t realize. Well, that’s gonna suck for a lot of people in a lot of industries sometime soon.

      • @drawerair
        link
        English
        2
        edit-2
        9 months ago

        There’ll probably be no more diskette makers in the future, so the train operator should stop using diskettes. I did a quick googling.

        In January 2024, Japan announced it will no longer require floppy-disk copies of government submissions.

        I did a quick search on amazon.com too. You can buy diskettes there.

        I’m assuming the folks doing the upgrade know what they’re doing. Train operation is key, so to be sure, they may need to slowly move away from diskettes and slowly integrate ssds or whatever the replacement will be.

  • @Buffalox
    link
    English
    30
    edit-2
    9 months ago

    Turns out that in 1998, SFMTA had the latest cutting edge technology when they installed their automatic train control system.

    "We were the first agency in the U.S. to adopt this particular technology but it was from an era that computers didn’t have a hard drive

    Aaaand that’s when I stopped reading. Please, we had hard-drives in average office systems for more than a decade at that point.

    • @[email protected]
      link
      fedilink
      English
      209 months ago

      Sure computers had a hard drive, but it was the style at the time to remove them and use them as lifts in our shoes. You could tell who the poors were because they walked with a limp on account of only having one computer.

      • @GeekySalsa
        link
        English
        79 months ago

        This comment has major Grampa Simpson vibes and I love it.

        • @essteeyou
          link
          English
          19 months ago

          … we wore an onion on our hips, as was the fashion at the time…

    • @db2
      link
      English
      89 months ago

      Yeah they’re over a decade off from computers that didn’t come equipped with one by default.

    • AggressivelyPassive
      link
      fedilink
      English
      89 months ago

      I’m trying to justify that in my head, but the only idea that I have is that “old” hard drives couldn’t handle the vibrations of a train. But flash existed even back then, and floppies aren’t exactly known for their high capacity.

      • partial_accumen
        link
        English
        29 months ago

        Flash (NOVRAM or EEPROM as it was called at the time) did exit, but it was expensive, tiny capacity, and had astonishingly few write operations (compared to today) before it couldn’t be written to again. Some of the early stuff could be written (reprogrammed) as few as 1000 times and only had capacity of about 20KB.

    • Greg Clarke
      link
      fedilink
      English
      59 months ago

      Haha, that was literally the exact same point I stopped reading. I have emails older than this system and they weren’t stored on floppys 😂

    • @[email protected]
      link
      fedilink
      English
      49 months ago

      An interesting thought, that the author of that article is younger than me, possibly like 5+ years younger. And I’m only a bit under 28. Scary how it ticks.

    • @CrayonRosary
      link
      English
      19 months ago

      Maybe they meant home computers, and that’s all most of their audience will picture in their heads, anyway. But yeah, not a very good computer historian.

      • partial_accumen
        link
        English
        29 months ago

        In 1990 I bought my first (very used PC) which had a 20MB hard drive in it. I In 1996 I upgraded my home computer to the largest consumer hard drive available 1.6GB.

        For reference, a floppy disk pictured hold 1.44MB.

        We had hard drives in home computers there too.

    • @stoly
      link
      English
      -19 months ago

      First several generations of hard drives really were awful and broke if you stared at them at them wrong. Floppies were more reliable, cheaper, and easy to get.

      • @[email protected]
        link
        fedilink
        English
        4
        edit-2
        9 months ago

        By 1998? No, hard drives were standard and reasonably reliable by then. Floppies were headed towards the end of their lifecycle with a high failure rate due to cutting costs.

        • @stoly
          link
          English
          29 months ago

          HDDs before, say, 1986, were junk. Those that came after will still very expensive until the late 90s, when prices started to drop.

          • @Buffalox
            link
            English
            39 months ago

            Incidentally 1986 was the year I got my first hard-drive. ;)

            And yes they were absolutely expensive in the mid 80’s. The first 20MB MFM i bought was almost $1000 USD. This was in Europe, prices were probably lower in USA.
            But I worked as manager for a computer shop, and the 4 years I worked in that, we only had 1 defect under warranty.

            I remember it clearly, because it was a woman coming in with her computer saying her hard-drive was defect, most people being somewhat ignorant of computers, often called the whole computer hard-drive, and since defects were rare, I obviously thought she meant the computer. But no she actually knew what she was talking about, and she was the unlucky one to get the only defect hard-drive we ever delivered! OK my memory may not be perfect, there may have been others, but it certainly wasn’t considered a problem in general.

            But I remember I heard about defects, very old Seagate drives could get stuck, if that happened, I was told you could tap them against the table flat down, and that would often resolve the issue!!!

            Apart from that, I was much more confident with drives back then, because you could actually hear if they were going bad, as the drive would make a suspicious sound in its attempt to calibrate and reread, with a surface scan you could see if they were actually going bad, or it was just some unusual file operation. Generally in time to switch to another drive before actually losing any files. There may be some truth to drives being more unreliable back then, but they were (so to speak) more unreliable in a more reliable way.

            Today this functionality is hidden in the SMART system, which I find unreliable. Drives reallocate bad blocks themselves keeping the user ignorant, until suddenly they are completely dead.

            • @stoly
              link
              English
              29 months ago

              I agree with it being nice to be able to hear how they were doing. But it’s nice now to manage a thousand computers.

  • @[email protected]
    link
    fedilink
    English
    89 months ago

    I still love the concept of floppy diskettes. Sure, some of this is nostalgia, but what if you had something like super fast solid state memory encased in a nice solid shell like that? Sure, sure, like a USB drive…but the contacts could be protected with the little slidy-shield bit and nobody could accidentally snag the USB sticking out and damage it and the port.

    I think I just really miss the “kaCHUNK” of inserting physical solid media, and flipping through stacks of them…maybe not so much the capacity or read speeds :)

  • @woelkchen
    link
    English
    59 months ago

    Ah yes, the stone age of 1998, “an era when computers didn’t have a hard drive”.🤦🤦🤦🤦

  • @reddig33
    link
    English
    39 months ago

    Thinking about cost effective solutions, like running it in an emulator on modern hardware with disk images instead of floppies. They’ve probably gone and spent millions on replacing working sensors and writing all new software though.

    • @[email protected]
      link
      fedilink
      English
      19 months ago

      If they blow through a shitload of money and end up with a worse product then it will be easier to claim that public transit is worse than a metric fuckload more cars on the road.

    • @blazeknaveOP
      link
      English
      19 months ago

      Thin computing and VMs are still expensive migration, especially something this proprietary I’d imagine